WEBVTT

00:00:00.000 --> 00:00:01.540
<v Mark Morin>This is The Amp Hour Podcast.

00:00:03.340 --> 00:00:05.860
<v Mark Morin>Recorded March 9th, 2016.

00:00:07.840 --> 00:00:09.420
<v Mark Morin>Episode 290.

00:00:11.100 --> 00:00:13.580
<v Mark Morin>An interview with Mark Morin of Newfern.

00:00:30.000 --> 00:00:34.140
<v Dave Jones>Welcome to The Amp Hour. I'm Dave Jones from the AEV blog.

00:00:34.140 --> 00:00:36.400
<v Dave Jones>And I'm Chris Gammell of Contextual Electronics.

00:00:36.920 --> 00:00:39.540
<v Mark Morin>And I'm Mark Morin, Principal Engineer at Newfern.

00:00:40.300 --> 00:00:40.860
<v Chris Gammell>Welcome, Mark.

00:00:41.140 --> 00:00:42.900
<v Dave Jones>You were going to call yourself Jedi, Mark.

00:00:42.900 --> 00:00:43.940
<v Mark Morin>Yeah, I thought he was going to be.

00:00:44.360 --> 00:00:46.260
<v Mark Morin>I gave you guys the slip on that one, I guess.

00:00:46.260 --> 00:00:50.440
<v Chris Gammell>I guess we're not going to edit in the lightsaber noise now. Sorry, man.

00:00:51.020 --> 00:00:51.660
<v Chris Gammell>That's okay.

00:00:53.060 --> 00:00:54.500
<v Mark Morin>Hey, Mark, thanks for joining us.

00:00:54.980 --> 00:00:56.420
<v Mark Morin>Oh, no problem. Thank you, guys.

00:00:57.060 --> 00:00:59.140
<v Mark Morin>So, what is Newfern?

00:00:59.140 --> 00:01:05.480
<v Mark Morin>We are a fiber optic company in Connecticut, you know, in the United States.

00:01:06.380 --> 00:01:06.820
<v Mark Morin>Uh-huh.

00:01:07.400 --> 00:01:09.480
<v Mark Morin>I feel like you guys have an international op.

00:01:09.480 --> 00:01:10.640
<v Mark Morin>Ah, right, yeah. That's good.

00:01:11.240 --> 00:01:14.440
<v Mark Morin>So, we make actual fiber.

00:01:15.040 --> 00:01:16.880
<v Mark Morin>We have an on-site draw.

00:01:18.000 --> 00:01:18.080
<v Mark Morin>Nice.

00:01:18.080 --> 00:01:21.020
<v Mark Morin>Make the best specialty fibers in the world.

00:01:21.480 --> 00:01:24.700
<v Mark Morin>If you go to any lab anywhere, there will be Newfern spools in it.

00:01:25.000 --> 00:01:28.660
<v Mark Morin>And then we also have a smaller group that makes lasers.

00:01:29.140 --> 00:01:34.060
<v Mark Morin>And we have manufacturing lasers for, like, material processing.

00:01:34.320 --> 00:01:40.580
<v Mark Morin>And then there's higher power lasers that are kind of an ITAR thing.

00:01:41.940 --> 00:01:43.700
<v Dave Jones>What's an ITAR thing for those who don't know?

00:01:44.260 --> 00:01:47.100
<v Mark Morin>International trafficking on arms regulation.

00:01:47.280 --> 00:01:48.820
<v Mark Morin>That means that we're not going to talk about them.

00:01:48.820 --> 00:01:49.520
<v Chris Gammell>He can't tell you, Dave.

00:01:49.900 --> 00:01:50.820
<v Mark Morin>He can't tell you.

00:01:50.820 --> 00:01:51.480
<v Chris Gammell>Because you're not American.

00:01:52.260 --> 00:01:53.380
<v Mark Morin>Yeah, past that.

00:01:53.460 --> 00:01:54.320
<v Mark Morin>We're not talking about it.

00:01:54.360 --> 00:01:54.860
<v Chris Gammell>That's what that means.

00:01:54.880 --> 00:01:55.240
<v Chris Gammell>That's okay.

00:01:55.860 --> 00:02:00.000
<v Chris Gammell>I'm sure that, you know, lasers on their own or lasers of all types are interesting.

00:02:00.160 --> 00:02:02.280
<v Chris Gammell>So, we don't need to dive into the ITAR stuff.

00:02:02.740 --> 00:02:02.980
<v Dave Jones>Sure.

00:02:02.980 --> 00:02:05.580
<v Dave Jones>And everyone wants to hear about lasers, of course.

00:02:05.720 --> 00:02:09.760
<v Dave Jones>But, you know, poor old fiber optic doesn't get much love, does it?

00:02:10.080 --> 00:02:10.380
<v Dave Jones>Right.

00:02:10.660 --> 00:02:11.840
<v Dave Jones>And it probably should.

00:02:11.920 --> 00:02:15.700
<v Dave Jones>There's a lot of tech which goes into fiber, I'm led to believe.

00:02:16.020 --> 00:02:16.420
<v Dave Jones>Yes.

00:02:17.200 --> 00:02:18.040
<v Mark Morin>Tons, I hear.

00:02:18.040 --> 00:02:18.540
<v Mark Morin>Tell us.

00:02:18.540 --> 00:02:19.180
<v Mark Morin>Tell us.

00:02:19.980 --> 00:02:23.480
<v Mark Morin>I'm certainly not involved in that on a day-to-day basis at all.

00:02:23.480 --> 00:02:29.360
<v Mark Morin>So, you know, they have, I guess they start with a preform.

00:02:30.140 --> 00:02:34.200
<v Mark Morin>And I'm going to, if anybody here listens to this, I'm going to get butchered for my

00:02:34.200 --> 00:02:35.540
<v Mark Morin>simplistic explanation.

00:02:35.840 --> 00:02:37.460
<v Mark Morin>But they start with a glass preform.

00:02:37.680 --> 00:02:39.700
<v Chris Gammell>Well, there's clear cables.

00:02:39.940 --> 00:02:40.620
<v Chris Gammell>That's about it.

00:02:40.860 --> 00:02:41.220
<v Chris Gammell>Basically.

00:02:41.580 --> 00:02:41.740
<v Chris Gammell>Yeah.

00:02:41.740 --> 00:02:45.980
<v Mark Morin>And then they put it in this flaming tower and it just kind of drips down and turns into

00:02:45.980 --> 00:02:47.480
<v Mark Morin>fiber, you know.

00:02:47.520 --> 00:02:47.820
<v Mark Morin>Oh, really?

00:02:48.080 --> 00:02:48.560
<v Mark Morin>That's cool.

00:02:48.580 --> 00:02:48.780
<v Mark Morin>Yeah.

00:02:48.960 --> 00:02:52.360
<v Mark Morin>I mean, it's super simplistic explanation, I suppose.

00:02:52.360 --> 00:02:52.660
<v Mark Morin>Yeah.

00:02:52.660 --> 00:02:55.740
<v Dave Jones>But what makes your stuff better than the rest?

00:02:55.780 --> 00:02:59.300
<v Dave Jones>You said, like, the best optical labs in the world will have your fiber.

00:02:59.400 --> 00:03:00.460
<v Dave Jones>What makes it better?

00:03:00.580 --> 00:03:03.280
<v Dave Jones>Is it lower, I don't know?

00:03:03.780 --> 00:03:04.960
<v Dave Jones>Is it lower jitter?

00:03:05.160 --> 00:03:06.940
<v Dave Jones>Is it lower blah, blah, insert?

00:03:06.940 --> 00:03:07.380
<v Dave Jones>Super pure.

00:03:07.540 --> 00:03:07.920
<v Dave Jones>I don't know.

00:03:08.220 --> 00:03:14.980
<v Mark Morin>I think our polarization maintaining fiber is one of the fibers everybody stands on.

00:03:14.980 --> 00:03:14.980
<v Speaker ?>

00:03:14.980 --> 00:03:18.000
<v Dave Jones>So that's a key parameter, is it?

00:03:18.280 --> 00:03:20.260
<v Dave Jones>Polarization of the light as it travels.

00:03:20.260 --> 00:03:23.440
<v Mark Morin>If you're trying to maintain it, yeah, it's a huge thing.

00:03:23.600 --> 00:03:29.600
<v Mark Morin>So there's kind of like if you imagine a flag on top of every photon and the flags.

00:03:29.800 --> 00:03:30.120
<v Mark Morin>I like that.

00:03:30.120 --> 00:03:30.260
<v Mark Morin>Right?

00:03:30.880 --> 00:03:31.560
<v Mark Morin>That's novel.

00:03:31.700 --> 00:03:31.800
<v Mark Morin>Yeah.

00:03:31.800 --> 00:03:37.280
<v Mark Morin>As the flags, as the photons are going down the pipe that is the fiber optic, the flags

00:03:37.280 --> 00:03:38.480
<v Mark Morin>are all randomly oriented.

00:03:38.680 --> 00:03:45.280
<v Mark Morin>So if you take this polarizing fiber and you coil it up correctly, you can get all the flags

00:03:45.280 --> 00:03:52.100
<v Mark Morin>to kind of orient themselves over into the same direction over a length of fiber, right?

00:03:52.140 --> 00:03:53.540
<v Dave Jones>That's what like a polarization fiber does.

00:03:53.540 --> 00:03:57.840
<v Dave Jones>Please don't tell me that makes your audio system sound better.

00:03:59.220 --> 00:03:59.700
<v Dave Jones>No.

00:04:01.260 --> 00:04:01.660
<v Mark Morin>No.

00:04:01.660 --> 00:04:01.940
<v Mark Morin>Excellent.

00:04:01.940 --> 00:04:02.840
<v Mark Morin>That certainly does not.

00:04:05.040 --> 00:04:07.620
<v Mark Morin>Honestly, I probably, I've built the lasers.

00:04:07.760 --> 00:04:09.900
<v Mark Morin>I could measure the polarization.

00:04:10.240 --> 00:04:14.200
<v Mark Morin>I couldn't explain to you what they actually do with a polarized light when it comes out of

00:04:14.200 --> 00:04:14.600
<v Mark Morin>the laser.

00:04:15.280 --> 00:04:17.720
<v Mark Morin>It's the systems I've worked on.

00:04:17.720 --> 00:04:18.400
<v Mark Morin>That's what the scientists are for, right?

00:04:18.600 --> 00:04:18.800
<v Mark Morin>Sure.

00:04:18.800 --> 00:04:23.960
<v Dave Jones>Yeah, that's a big deal to the scientists who are doing fiber optic research and stuff

00:04:23.960 --> 00:04:24.520
<v Mark Morin>like that, right?

00:04:24.740 --> 00:04:31.020
<v Mark Morin>Some communications applications I've heard and then I kind of move on to the next project

00:04:31.020 --> 00:04:33.140
<v Mark Morin>before any of the implementation is actually done.

00:04:33.720 --> 00:04:38.700
<v Chris Gammell>I'm really interested in, I mean, so like it feels, you know, I already know it's not

00:04:38.700 --> 00:04:42.860
<v Chris Gammell>true before it comes out of my mouth, but it feels like fiber is kind of solved.

00:04:43.120 --> 00:04:43.560
<v Chris Gammell>Like, you know what I mean?

00:04:43.560 --> 00:04:47.720
<v Chris Gammell>Because obviously we're talking to Dave right now and even we're talking to each other,

00:04:47.720 --> 00:04:48.580
<v Chris Gammell>you know, from across the state.

00:04:48.580 --> 00:04:49.400
<v Dave Jones>I have a fiber, yeah.

00:04:49.540 --> 00:04:53.700
<v Chris Gammell>So like some of that stuff feels solved, but obviously there's going to be increased

00:04:53.700 --> 00:04:54.320
<v Chris Gammell>in technology.

00:04:54.500 --> 00:04:59.580
<v Chris Gammell>So like even on both the laser side and the fiber side, what is this current state of

00:04:59.580 --> 00:05:00.280
<v Chris Gammell>technology even?

00:05:00.380 --> 00:05:01.760
<v Chris Gammell>I honestly have no idea.

00:05:02.560 --> 00:05:04.260
<v Mark Morin>Oh God, neither do I.

00:05:05.160 --> 00:05:09.580
<v Mark Morin>The fiber we're talking over that's the internet is like SMF28.

00:05:10.360 --> 00:05:13.840
<v Mark Morin>It's like a standard telecom long distance communication fiber.

00:05:13.840 --> 00:05:18.180
<v Mark Morin>And that's like the polarization maintaining fiber I was talking about as a specialty thing

00:05:18.180 --> 00:05:18.960
<v Dave Jones>for, you know, labs or-

00:05:18.960 --> 00:05:18.960
<v Speaker ?>

00:05:18.960 --> 00:05:21.240
<v Dave Jones>For science experiments and stuff like that.

00:05:21.240 --> 00:05:24.340
<v Mark Morin>Some kind of laser that would be a point to point thing or-

00:05:24.340 --> 00:05:26.500
<v Dave Jones>Well, that's the thing I was going to ask.

00:05:26.660 --> 00:05:29.600
<v Dave Jones>Like, you know, people talk about, oh, just lay fiber and that's it.

00:05:29.660 --> 00:05:30.240
<v Dave Jones>It's done.

00:05:30.240 --> 00:05:34.980
<v Dave Jones>And then we'll be able to use the bandwidth of it for the next hundred years, you know?

00:05:35.280 --> 00:05:35.800
<v Dave Jones>Kind of.

00:05:36.180 --> 00:05:36.420
<v Dave Jones>Yeah.

00:05:36.480 --> 00:05:37.860
<v Dave Jones>Like, is it like, yeah.

00:05:38.100 --> 00:05:42.560
<v Dave Jones>But, you know, you're saying it's kind of like a standard kind of, you know, fiber that

00:05:42.560 --> 00:05:43.140
<v Dave Jones>they lay down.

00:05:43.240 --> 00:05:45.660
<v Dave Jones>Is that good enough for the traffic?

00:05:45.780 --> 00:05:50.240
<v Dave Jones>Or will they have to rip up all these international fiber links in 10 years because, oh, well,

00:05:50.340 --> 00:05:52.240
<v Dave Jones>we've got all this electronics and optics.

00:05:52.240 --> 00:05:52.560
<v Dave Jones>Yeah.

00:05:53.200 --> 00:05:54.560
<v Dave Jones>Like, you know, like we can't-

00:05:54.560 --> 00:05:54.680
<v Dave Jones>What are that for?

00:05:54.800 --> 00:05:55.280
<v Dave Jones>You know, we need it.

00:05:55.280 --> 00:05:56.080
<v Dave Jones>It's-

00:05:56.080 --> 00:05:59.860
<v Dave Jones>Will they find it's not good enough maybe in 10, 20 years?

00:06:00.400 --> 00:06:07.260
<v Mark Morin>I think for telecom communications, they try and exploit bandwidth that they're not currently

00:06:07.260 --> 00:06:07.740
<v Mark Morin>using.

00:06:08.000 --> 00:06:08.920
<v Mark Morin>So if you have a-

00:06:08.920 --> 00:06:13.160
<v Mark Morin>You know, like the standard EDFA for telecom is a 1550 central wavelength.

00:06:13.160 --> 00:06:21.500
<v Mark Morin>So you would try and make some kind of out-of-band laser, you know, whether it's ytterbium or thulium.

00:06:21.820 --> 00:06:24.700
<v Mark Morin>And then you would use those bands to try-

00:06:24.700 --> 00:06:26.700
<v Dave Jones>You can't just throw those words in there.

00:06:27.580 --> 00:06:28.420
<v Mark Morin>Also, can you spell them?

00:06:28.440 --> 00:06:30.640
<v Chris Gammell>Because I'm taking notes here and I have no idea what you just said.

00:06:30.660 --> 00:06:30.820
<v Chris Gammell>Yeah.

00:06:31.080 --> 00:06:36.040
<v Mark Morin>If you go way down to the bottom of the table of elements, there's a couple of, like,

00:06:36.460 --> 00:06:36.820
<v Mark Morin>BMs.

00:06:37.060 --> 00:06:37.880
<v Mark Morin>They end in BM.

00:06:38.040 --> 00:06:42.760
<v Mark Morin>And they're all the rare earth elements that they kind of dope the center of the fiber

00:06:42.760 --> 00:06:43.280
<v Mark Morin>with, right?

00:06:43.400 --> 00:06:51.880
<v Mark Morin>So when you pump the fiber with a wavelength in the 960 range, so you shoot that into the

00:06:51.880 --> 00:06:53.480
<v Mark Morin>cladding of the fiber, right?

00:06:53.540 --> 00:06:54.440
<v Mark Morin>That's like the outer layer.

00:06:54.460 --> 00:06:54.700
<v Dave Jones>Oh, it's in-

00:06:54.700 --> 00:06:55.120
<v Dave Jones>Oh, okay.

00:06:55.160 --> 00:06:56.160
<v Dave Jones>So it's in the cladding.

00:06:56.260 --> 00:06:57.440
<v Dave Jones>It's not in the glass itself.

00:06:57.660 --> 00:06:59.720
<v Mark Morin>Well, the elements in the glass in the-

00:06:59.720 --> 00:07:01.100
<v Mark Morin>Well, it's all glass, but-

00:07:01.100 --> 00:07:01.400
<v Mark Morin>Right.

00:07:01.460 --> 00:07:03.420
<v Mark Morin>The element is in the center of the glass.

00:07:03.420 --> 00:07:08.940
<v Mark Morin>And then you kind of shoot a wavelength like 960, the pump light, right?

00:07:09.020 --> 00:07:12.580
<v Mark Morin>You're trying to pump up the inversion level of the rare earth element atom.

00:07:13.360 --> 00:07:21.980
<v Mark Morin>So you shoot in, like, 960, for example, and then the index refraction of each layer of

00:07:21.980 --> 00:07:26.120
<v Mark Morin>the fiber kind of keeps the reflected waves, right?

00:07:26.180 --> 00:07:34.420
<v Mark Morin>Because the wave is never really going to enter perfectly, like, maridonial to the fiber.

00:07:34.420 --> 00:07:35.040
<v Mark Morin>So-

00:07:35.040 --> 00:07:36.040
<v Dave Jones>I have experience in that game.

00:07:36.040 --> 00:07:39.860
<v Chris Gammell>I'm going to take a quick break here, guys, and just say, I have no idea what you're talking

00:07:39.860 --> 00:07:40.160
<v Speaker ?>about.

00:07:40.340 --> 00:07:44.200
<v Chris Gammell>I don't expect to, and I just wanted to show some solidarity with some of our listeners

00:07:44.200 --> 00:07:49.660
<v Chris Gammell>right now who are just staring at their podcast players saying, what the hell is this?

00:07:50.280 --> 00:07:50.940
<v Mark Morin>This is great.

00:07:50.940 --> 00:07:56.660
<v Mark Morin>So a maridonial ray is a ray of, like, a photon that goes directly down the middle of the

00:07:56.660 --> 00:07:56.940
<v Mark Morin>fiber.

00:07:57.080 --> 00:08:01.000
<v Mark Morin>It's like a theoretical perfection that never really gets achieved, right?

00:08:01.000 --> 00:08:08.180
<v Mark Morin>So a skew ray is more at the angle tangent to the side of the fiber.

00:08:08.180 --> 00:08:14.320
<v Mark Morin>So you launch down some non-zero angle into the core of the fiber, and then it would bounce

00:08:14.320 --> 00:08:15.200
<v Mark Morin>around in there, right?

00:08:15.280 --> 00:08:16.720
<v Mark Morin>Between the walls of the fiber.

00:08:16.780 --> 00:08:19.440
<v Chris Gammell>And then there's, like, losses and stuff like that because of the bouncing or what?

00:08:20.060 --> 00:08:21.020
<v Mark Morin>Because of the bouncing.

00:08:21.220 --> 00:08:25.260
<v Mark Morin>And if you turn the fiber, your loss is increased because the angle of incidence is higher.

00:08:25.400 --> 00:08:25.700
<v Mark Morin>Yes.

00:08:25.700 --> 00:08:32.260
<v Mark Morin>But the fiber is constructed so that the outer layers are more reflective concentrically as

00:08:32.260 --> 00:08:32.880
<v Mark Morin>you get to the middle.

00:08:33.060 --> 00:08:36.600
<v Mark Morin>And then, so if you launch light in, it kind of finds its way to the core, right?

00:08:37.100 --> 00:08:37.580
<v Mark Morin>Right.

00:08:37.920 --> 00:08:45.420
<v Mark Morin>So with, like, a yterbium or erbium fiber, so the core is doped with this rare earth element,

00:08:45.420 --> 00:08:51.060
<v Mark Morin>and you shoot photons into the cladding, and then that finds its way to the core.

00:08:51.060 --> 00:08:57.280
<v Mark Morin>And then when those photons, like, hit the electron that's actually, like, hanging in

00:08:57.280 --> 00:09:03.220
<v Mark Morin>the valence layer, the outer valence layer of the rare earth element, it'll knock it

00:09:03.220 --> 00:09:04.580
<v Mark Morin>up one valence layer, right?

00:09:04.720 --> 00:09:04.880
<v Mark Morin>Mm-hmm.

00:09:04.880 --> 00:09:05.260
<v Mark Morin>Ah.

00:09:05.940 --> 00:09:06.500
<v Mark Morin>And then you just kind of—

00:09:06.500 --> 00:09:07.920
<v Chris Gammell>Because those things have a lot of layers, too.

00:09:08.000 --> 00:09:11.340
<v Chris Gammell>Like, the stuff at the bottom of the periodic table has tons and tons and tons and tons

00:09:11.340 --> 00:09:11.580
<v Chris Gammell>of layers.

00:09:11.580 --> 00:09:11.600
<v Chris Gammell>Right.

00:09:11.600 --> 00:09:14.420
<v Mark Morin>There's hundreds of electrons in these things, right?

00:09:14.420 --> 00:09:14.520
<v Mark Morin>Right.

00:09:14.520 --> 00:09:14.700
<v Mark Morin>Right.

00:09:14.700 --> 00:09:20.700
<v Mark Morin>So you bump a couple of electrons up, and when they're at a higher energy state,

00:09:21.060 --> 00:09:26.980
<v Mark Morin>they either can fall on their own, which is called ASC, like, automatic stimulated emission,

00:09:26.980 --> 00:09:32.240
<v Mark Morin>or you can seed them with a signal.

00:09:33.280 --> 00:09:40.240
<v Mark Morin>So if you shoot a second set of photons that are the exact same wavelength of the rare earth

00:09:40.240 --> 00:09:47.460
<v Mark Morin>elements, like, natural emission down the fiber, you'll just happen to knock down these electrons

00:09:47.460 --> 00:09:51.720
<v Mark Morin>and produce, like, clones of the photon you sent in at the same wavelength, right?

00:09:52.900 --> 00:09:53.380
<v Chris Gammell>So—

00:09:53.380 --> 00:09:55.340
<v Chris Gammell>And this all has to happen immediately?

00:09:56.320 --> 00:09:57.060
<v Chris Gammell>Oh, it's all—

00:09:57.060 --> 00:09:58.380
<v Chris Gammell>Like, they're chasing each other, almost?

00:09:58.600 --> 00:09:59.880
<v Chris Gammell>I mean, like, at the speed of light kind of thing?

00:10:00.340 --> 00:10:01.140
<v Mark Morin>Yes, literally.

00:10:01.260 --> 00:10:01.380
<v Mark Morin>Yeah.

00:10:01.380 --> 00:10:09.740
<v Mark Morin>So, like, yterbium is—1064 would be your central wavelength target for a yterbium laser.

00:10:09.960 --> 00:10:15.060
<v Mark Morin>So you shoot a 1064 photon down the center of a yterbium-doped fiber that's already pumped

00:10:15.060 --> 00:10:22.300
<v Mark Morin>up, and then every photon that you hit with a photon that you seeded will knock down—or

00:10:23.100 --> 00:10:24.680
<v Mark Morin>every electron you hit, I should say.

00:10:24.680 --> 00:10:29.500
<v Mark Morin>When that knocks down a valence layer, it releases, you know, 5 or 10 photons.

00:10:29.680 --> 00:10:34.500
<v Mark Morin>So the amplification happens there, like, on a particle-by-particle basis.

00:10:34.980 --> 00:10:35.080
<v Mark Morin>Wow.

00:10:35.540 --> 00:10:40.760
<v Mark Morin>So just over the law of large numbers, because you're just pumping a ton of photons into

00:10:40.760 --> 00:10:48.360
<v Mark Morin>this fiber, you will hit a bunch of other electrons and emit a ton of photons.

00:10:48.560 --> 00:10:51.500
<v Mark Morin>So that's kind of how the amplification works.

00:10:51.500 --> 00:10:57.500
<v Mark Morin>So your laser, like a fiber laser, is just a couple of coils of these things arranged

00:10:57.500 --> 00:11:01.220
<v Mark Morin>in series, kind of like a circuit.

00:11:02.260 --> 00:11:12.260
<v Mark Morin>And each bank would have its own pump light that would pump up the rare earth element to

00:11:12.260 --> 00:11:15.460
<v Mark Morin>a higher, you know, the electrons to a higher valence level.

00:11:15.460 --> 00:11:19.800
<v Mark Morin>And then because your previous state already has the amplified light coming through, you

00:11:19.800 --> 00:11:27.140
<v Mark Morin>can pump more electrons up in the sequential states, right?

00:11:27.220 --> 00:11:34.380
<v Mark Morin>So each stage can have more gain than the last because you're seeding with more photons.

00:11:34.720 --> 00:11:39.140
<v Mark Morin>So that's basically how the fiber laser works.

00:11:39.140 --> 00:11:45.500
<v Mark Morin>And then at the end, you put it into some useful, either focus it on a material or focus it

00:11:45.500 --> 00:11:46.940
<v Mark Morin>into a fiber to send a signal.

00:11:47.740 --> 00:11:53.740
<v Mark Morin>You know, your seed photons could be a digital pulse, right?

00:11:53.900 --> 00:11:54.060
<v Chris Gammell>Yeah.

00:11:54.160 --> 00:11:56.520
<v Mark Morin>Like some carrier wave.

00:11:56.640 --> 00:11:59.700
<v Mark Morin>And then you just let your signal ride on that.

00:11:59.940 --> 00:12:01.680
<v Chris Gammell>So you're talking about basically doing this.

00:12:01.760 --> 00:12:03.240
<v Chris Gammell>This is in a gain stage.

00:12:03.320 --> 00:12:07.040
<v Chris Gammell>It's all outside of like a transmission, actual transmission piece of fiber, right?

00:12:07.040 --> 00:12:08.140
<v Chris Gammell>So just to simplify that.

00:12:08.460 --> 00:12:13.180
<v Chris Gammell>So if I'm sending a signal from, I'm just sending a single pulse from me to Dave over

00:12:13.180 --> 00:12:14.860
<v Chris Gammell>the transatlantic cable.

00:12:14.920 --> 00:12:16.420
<v Chris Gammell>And I know there's a lot of stuff in between there.

00:12:16.900 --> 00:12:21.260
<v Chris Gammell>But if I'm sending a single pulse, I would use this kind of coil of this Atterbian stuff

00:12:21.260 --> 00:12:22.400
<v Chris Gammell>at the 1064.

00:12:23.220 --> 00:12:25.660
<v Chris Gammell>And then that would basically act as an amplifier.

00:12:25.700 --> 00:12:26.020
<v Chris Gammell>Is that right?

00:12:26.880 --> 00:12:27.240
<v Mark Morin>Yes.

00:12:27.560 --> 00:12:28.140
<v Mark Morin>Well, yeah.

00:12:28.140 --> 00:12:36.000
<v Mark Morin>So like you're in a simpler version of this is your hometown's fiber network.

00:12:36.480 --> 00:12:41.320
<v Mark Morin>On some telephone poles, there's going to be a box with a little amplification stage in it.

00:12:41.480 --> 00:12:47.120
<v Mark Morin>That's just going to crank up the signal enough for the hundred homes that are around that box.

00:12:47.400 --> 00:12:52.200
<v Mark Morin>And then the line, you know, you go down to the next neighborhood, there's another box that

00:12:52.200 --> 00:12:53.480
<v Mark Morin>just cranks the signal up again.

00:12:53.700 --> 00:12:53.960
<v Mark Morin>All right.

00:12:53.960 --> 00:12:56.340
<v Mark Morin>So they kind of daisy chain them around.

00:12:56.540 --> 00:12:58.860
<v Mark Morin>The transatlantic, I think there's repeaters in the middle.

00:12:58.860 --> 00:12:59.560
<v Mark Morin>Yeah, I think there is too.

00:12:59.700 --> 00:13:00.100
<v Mark Morin>Oh, yeah.

00:13:00.180 --> 00:13:03.560
<v Dave Jones>Every hundred, 50Ks, 100Ks or something, isn't it?

00:13:04.100 --> 00:13:04.340
<v Mark Morin>Yeah.

00:13:04.540 --> 00:13:07.820
<v Mark Morin>And the long haul fiber, though, is like passive, I'm pretty sure.

00:13:08.320 --> 00:13:08.520
<v Mark Morin>Right.

00:13:08.720 --> 00:13:08.940
<v Mark Morin>Okay.

00:13:09.000 --> 00:13:13.480
<v Dave Jones>Now, you mentioned it literally happens at the speed of light.

00:13:13.580 --> 00:13:15.580
<v Dave Jones>But isn't there a fiber optic latency?

00:13:16.860 --> 00:13:17.740
<v Mark Morin>There is some.

00:13:18.380 --> 00:13:18.780
<v Dave Jones>Right.

00:13:19.080 --> 00:13:19.880
<v Dave Jones>Some, how much?

00:13:19.880 --> 00:13:21.160
<v Chris Gammell>It's not a air kind of thing or what?

00:13:21.300 --> 00:13:22.180
<v Chris Gammell>Order of magnitude.

00:13:22.180 --> 00:13:22.320
<v Dave Jones>Dude.

00:13:23.300 --> 00:13:23.700
<v Dave Jones>Yeah.

00:13:23.980 --> 00:13:25.360
<v Dave Jones>Is it like, yeah.

00:13:25.520 --> 00:13:27.520
<v Dave Jones>Can you give us a rule of thumb figure?

00:13:28.360 --> 00:13:35.960
<v Mark Morin>That's, I'm going to guess that it's like tenths or single percentages delay.

00:13:36.160 --> 00:13:36.480
<v Dave Jones>Right.

00:13:36.860 --> 00:13:37.680
<v Mark Morin>Of the speed of light.

00:13:37.760 --> 00:13:40.760
<v Mark Morin>It's not half the speed of light or anything like that.

00:13:40.780 --> 00:13:40.780
<v Speaker ?>

00:13:40.860 --> 00:13:41.100
<v Mark Morin>Got it.

00:13:41.420 --> 00:13:44.000
<v Mark Morin>And I'm pretty sure that depends on the material in the core.

00:13:44.680 --> 00:13:45.040
<v Mark Morin>Absolutely.

00:13:45.380 --> 00:13:45.480
<v Mark Morin>Yes.

00:13:45.480 --> 00:13:50.000
<v Mark Morin>So you'd have to pick which fiber you're talking about and then you could figure that out.

00:13:50.000 --> 00:13:54.340
<v Mark Morin>We should have a follow-up episode and actually have one of the optical scientists come on

00:13:54.340 --> 00:13:54.540
<v Mark Morin>here.

00:13:56.860 --> 00:14:02.840
<v Chris Gammell>So, but basically when you're going from an electrical to an optical like that, you're

00:14:02.840 --> 00:14:06.500
<v Chris Gammell>saying that there's going to be a laser and then there's going to be an amplification stage

00:14:06.500 --> 00:14:07.220
<v Chris Gammell>possibly.

00:14:07.880 --> 00:14:11.980
<v Chris Gammell>And then it's just photons all the way down until you get to a receiver kind of thing.

00:14:11.980 --> 00:14:15.700
<v Mark Morin>Well, you could have a laser on its own.

00:14:16.000 --> 00:14:21.420
<v Mark Morin>That's not really high speed like an internet signal would be different, but just a laser.

00:14:21.780 --> 00:14:28.320
<v Mark Morin>You could just pump the medium and get the ASE signal and then amplify that or use some

00:14:28.320 --> 00:14:32.960
<v Mark Morin>gratings to set up the, well, there's like gratings are basically mirrors that are tuned

00:14:32.960 --> 00:14:35.160
<v Mark Morin>to a wavelength that are inserted in the fiber.

00:14:35.160 --> 00:14:40.980
<v Mark Morin>So you could use gratings to set up the wavelength you want in a small cavity, you know, a small

00:14:40.980 --> 00:14:49.760
<v Mark Morin>coil, and then you could send that down, send that signal down the fiber to a higher amplification

00:14:49.760 --> 00:14:50.240
<v Mark Morin>stage.

00:14:51.400 --> 00:14:53.660
<v Dave Jones>Isn't the, oh, sorry, go on.

00:14:54.340 --> 00:14:57.200
<v Mark Morin>That's a, like a, you'd call it a CW laser, right?

00:14:57.220 --> 00:14:57.940
<v Mark Morin>Continuous wave.

00:14:58.180 --> 00:14:58.440
<v Dave Jones>Right.

00:14:58.660 --> 00:15:03.460
<v Mark Morin>If you wanted to send packets of like internet, you would have some kind of diode that you would

00:15:03.460 --> 00:15:04.700
<v Mark Morin>modulate super fast.

00:15:04.860 --> 00:15:04.920
<v Mark Morin>Yeah.

00:15:05.360 --> 00:15:11.940
<v Mark Morin>And usually they just dither that diode's intensity by a couple hundred milliamps, I want to say.

00:15:12.280 --> 00:15:12.680
<v Chris Gammell>Oh, really?

00:15:12.740 --> 00:15:13.460
<v Chris Gammell>They don't take it all the way?

00:15:13.460 --> 00:15:15.900
<v Mark Morin>So, no, it doesn't, it never goes to zero.

00:15:16.000 --> 00:15:16.200
<v Chris Gammell>Yeah.

00:15:16.420 --> 00:15:17.660
<v Chris Gammell>If you, it's a lot.

00:15:17.660 --> 00:15:18.460
<v Chris Gammell>I guess you want to keep it biased, right?

00:15:18.500 --> 00:15:19.320
<v Chris Gammell>So that would make sense.

00:15:19.800 --> 00:15:20.200
<v Mark Morin>Right.

00:15:20.200 --> 00:15:26.720
<v Mark Morin>And the diode, like LEDs and laser diodes have a threshold where they start emitting.

00:15:27.020 --> 00:15:31.720
<v Mark Morin>So there's, you know, you'll get to 600 milliamps and there'll be no light.

00:15:31.720 --> 00:15:33.860
<v Mark Morin>And then at 700, you have a bunch of light.

00:15:34.020 --> 00:15:40.060
<v Mark Morin>So you could really even just dither around that lazing threshold.

00:15:40.340 --> 00:15:41.980
<v Mark Morin>But there's spiking involved with that.

00:15:42.140 --> 00:15:48.940
<v Mark Morin>And I think real companies would just go well into the lazing and then kind of move around

00:15:48.940 --> 00:15:53.300
<v Mark Morin>and make a one this many dB and a zero is below this dB, right?

00:15:53.300 --> 00:15:53.480
<v Mark Morin>Right.

00:15:53.700 --> 00:15:54.000
<v Chris Gammell>Yeah.

00:15:54.000 --> 00:15:57.520
<v Chris Gammell>Because then you could test if it's just broken, broken instead of off for a split second

00:15:57.520 --> 00:15:58.080
<v Chris Gammell>kind of thing, right?

00:15:58.760 --> 00:15:59.020
<v Chris Gammell>Right.

00:15:59.020 --> 00:15:59.500
<v Chris Gammell>Exactly.

00:15:59.700 --> 00:16:03.540
<v Dave Jones>That's interesting because I figure that a lot of people out there would think that

00:16:03.540 --> 00:16:07.940
<v Dave Jones>lasers just, you know, on, off, on, off, you know, it'd be ones and zeros down here,

00:16:07.940 --> 00:16:10.640
<v Dave Jones>but it's, it's more analog-y than that.

00:16:11.480 --> 00:16:11.880
<v Mark Morin>Yeah.

00:16:11.980 --> 00:16:13.420
<v Mark Morin>Like everything's analog.

00:16:13.920 --> 00:16:14.280
<v Mark Morin>Yay.

00:16:14.640 --> 00:16:15.180
<v Mark Morin>Damn it.

00:16:15.180 --> 00:16:22.560
<v Mark Morin>You know, it's, it's, it's all digital on paper and then analog and you try and do it

00:16:22.560 --> 00:16:23.100
<v Mark Morin>in real life.

00:16:23.100 --> 00:16:32.320
<v Dave Jones>But now isn't, isn't the holy grail of fiber optics, um, to have completely, um, optical

00:16:32.320 --> 00:16:38.860
<v Dave Jones>amplifiers like optical charge pumps or whatever the term is so that you don't have to in,

00:16:38.940 --> 00:16:44.340
<v Dave Jones>in these repeaters you've been talking about, you don't have to convert it to convert optical

00:16:44.340 --> 00:16:48.300
<v Dave Jones>to, um, a signal and then convert that back to optical again.

00:16:48.300 --> 00:16:48.780
<v Dave Jones>Right.

00:16:49.780 --> 00:16:53.000
<v Mark Morin>I, I, I would think that they do that in these repeaters.

00:16:53.400 --> 00:16:53.800
<v Dave Jones>Right.

00:16:54.340 --> 00:16:59.500
<v Mark Morin>I would think that they just take, they take the fiber in, have an amplification stage that

00:16:59.500 --> 00:17:01.840
<v Mark Morin>just runs and then they take the fiber out.

00:17:01.940 --> 00:17:03.820
<v Dave Jones>That's, that's a purely optical amplifier.

00:17:03.820 --> 00:17:09.180
<v Dave Jones>Because you don't want to have to convert, um, from optical if you don't have to.

00:17:09.320 --> 00:17:10.900
<v Mark Morin>You don't want to convert the signal.

00:17:11.280 --> 00:17:11.580
<v Mark Morin>No.

00:17:11.920 --> 00:17:13.300
<v Mark Morin>From optical to electrical.

00:17:13.300 --> 00:17:18.440
<v Mark Morin>You'll have to make the pump light with, with electrical, I would guess, unless there's

00:17:18.440 --> 00:17:20.040
<v Mark Morin>some really wacky thing they can do.

00:17:20.620 --> 00:17:27.000
<v Mark Morin>But yeah, that I wouldn't think that in just like a long haul amplifier that you would convert

00:17:27.000 --> 00:17:30.740
<v Mark Morin>from signal to electrical and then back to signal.

00:17:30.740 --> 00:17:34.040
<v Dave Jones>Now, do you have any experience in this?

00:17:34.160 --> 00:17:40.600
<v Dave Jones>Because, um, I used to work at a company where the holy grail of, I used to work in the seismic

00:17:40.600 --> 00:17:44.920
<v Dave Jones>industry, which is underwater sonar, you know, searching for oil and submarines and other

00:17:44.920 --> 00:17:45.160
<v Dave Jones>things.

00:17:45.300 --> 00:17:51.060
<v Dave Jones>The holy grail of that and everyone, it was always, oh, it's a decade away.

00:17:51.140 --> 00:17:52.020
<v Dave Jones>It's a decade away.

00:17:52.020 --> 00:17:59.080
<v Dave Jones>What I thought was a new grail of that is using fiber optics as vibration sensing elements.

00:17:59.940 --> 00:18:02.700
<v Dave Jones>Have you heard about that or been involved in that?

00:18:03.280 --> 00:18:06.180
<v Mark Morin>Now, if you go on our applications page.

00:18:06.240 --> 00:18:07.040
<v Dave Jones>Ah, there you go.

00:18:07.040 --> 00:18:09.300
<v Mark Morin>click on geophysical.

00:18:09.300 --> 00:18:11.040
<v Mark Morin>Wait, you said you're an engineer, not a salesperson.

00:18:11.200 --> 00:18:11.420
<v Mark Morin>Come on.

00:18:11.560 --> 00:18:14.560
<v Mark Morin>Yeah, well, hey, I'll take it where I can get it.

00:18:14.560 --> 00:18:15.020
<v Mark Morin>Yeah, that's right.

00:18:15.520 --> 00:18:20.140
<v Mark Morin>But you go on geophysical, and then there's downhole instrumentation,

00:18:20.200 --> 00:18:22.540
<v Mark Morin>and there's oil and gas production monitoring.

00:18:23.160 --> 00:18:25.380
<v Dave Jones>Ah, there it is, geophysical, yep, yep.

00:18:25.380 --> 00:18:27.680
<v Mark Morin>So we're 10 years later, then, it sounds like.

00:18:28.240 --> 00:18:29.060
<v Dave Jones>Oil and gas.

00:18:30.060 --> 00:18:34.200
<v Mark Morin>It's probably been 10 years since you were saying that.

00:18:34.200 --> 00:18:35.120
<v Mark Morin>So how does that work, then?

00:18:35.120 --> 00:18:44.020
<v Mark Morin>I'm pretty sure they can sense the temperature and vibration down the fiber.

00:18:44.820 --> 00:18:46.340
<v Dave Jones>Oh, I didn't know about the temperature.

00:18:46.800 --> 00:18:47.560
<v Dave Jones>That's interesting.

00:18:47.840 --> 00:18:48.680
<v Dave Jones>I know the temperature.

00:18:49.000 --> 00:18:54.220
<v Mark Morin>That's on, like, one of our little sales brochures in the lobby.

00:18:54.340 --> 00:18:55.000
<v Mark Morin>That's for sure.

00:18:55.560 --> 00:18:56.500
<v Mark Morin>Let's see if I can.

00:18:56.680 --> 00:19:00.240
<v Chris Gammell>What's, how does it sense that?

00:19:00.300 --> 00:19:02.860
<v Chris Gammell>Just, like, how the medium changes or something like that?

00:19:02.860 --> 00:19:09.920
<v Mark Morin>I think they put a, another rare earth element or doping in the center of the fiber,

00:19:10.040 --> 00:19:15.700
<v Mark Morin>and that has a, it'd be like having a resistor that you built with a purposely high,

00:19:15.920 --> 00:19:16.920
<v Mark Morin>you know, a thermistor, right?

00:19:16.920 --> 00:19:17.060
<v Mark Morin>Yeah, right, right.

00:19:17.060 --> 00:19:18.000
<v Mark Morin>A high temperature coefficient.

00:19:18.240 --> 00:19:18.340
<v Mark Morin>Yeah.

00:19:18.400 --> 00:19:25.600
<v Mark Morin>So you'd have kind of the same, it's not resistance, but it's a, you know, you'd have some.

00:19:25.600 --> 00:19:31.860
<v Mark Morin>Yeah, yeah, index or refraction or coefficient that would, and then I'd assume you'd shoot pulses down,

00:19:31.960 --> 00:19:37.140
<v Mark Morin>reflect them, and see what you got back for intensity and delay to kind of figure this stuff out.

00:19:37.320 --> 00:19:37.500
<v Mark Morin>Yeah.

00:19:37.500 --> 00:19:43.960
<v Dave Jones>Now, I'm looking at your list here of your, like, geophysical products, fiber-type products,

00:19:44.020 --> 00:19:50.000
<v Dave Jones>and there's a category list, and the category list has, like, one of them has the element YB,

00:19:50.140 --> 00:19:51.560
<v Dave Jones>which I won't try and pronounce.

00:19:51.820 --> 00:19:52.140
<v Dave Jones>Uturbium.

00:19:52.480 --> 00:19:52.880
<v Dave Jones>Uturbium.

00:19:52.880 --> 00:19:53.900
<v Dave Jones>Yeah, that's the uturbium.

00:19:54.100 --> 00:19:54.240
<v Dave Jones>Yeah.

00:19:54.480 --> 00:19:55.000
<v Dave Jones>Uturbium.

00:19:55.000 --> 00:19:55.120
<v Dave Jones>Right.

00:19:55.540 --> 00:19:55.800
<v Dave Jones>Right?

00:19:56.300 --> 00:19:56.600
<v Dave Jones>Yes.

00:19:56.960 --> 00:20:05.620
<v Dave Jones>But then it's got other categories, like 1.0 micron, or it's got select cutoff.

00:20:05.620 --> 00:20:07.900
<v Dave Jones>Like, what are these categories about?

00:20:08.360 --> 00:20:14.300
<v Mark Morin>Well, like, 1 micron is the wavelength for a CO2 laser, so if you had a gas laser,

00:20:14.300 --> 00:20:19.000
<v Mark Morin>and then you wanted to launch that into a fiber, you would buy, like, a 1 micron fiber, I think.

00:20:20.600 --> 00:20:21.200
<v Dave Jones>Got it.

00:20:23.540 --> 00:20:25.740
<v Chris Gammell>So I'm going to take a little step back here.

00:20:26.380 --> 00:20:27.060
<v Chris Gammell>Yeah, sure.

00:20:27.080 --> 00:20:28.620
<v Chris Gammell>How the hell did you get into this?

00:20:28.620 --> 00:20:37.860
<v Mark Morin>Well, I was in the high school library one day, and they said laser electro-optic technicians

00:20:37.860 --> 00:20:42.880
<v Mark Morin>were going to be the highest, like, the highest demand field in the next 10 years.

00:20:43.040 --> 00:20:44.980
<v Mark Morin>And I said, well, I'll just go to school for that then.

00:20:45.300 --> 00:20:48.120
<v Chris Gammell>Wait, this was mid to late 90s, is that right?

00:20:48.660 --> 00:20:50.060
<v Mark Morin>1996, I think.

00:20:50.180 --> 00:20:50.600
<v Mark Morin>Exactly.

00:20:50.600 --> 00:20:53.100
<v Chris Gammell>Right when all the fiber stuff was getting rolled out.

00:20:53.420 --> 00:20:53.740
<v Chris Gammell>Sure.

00:20:53.800 --> 00:20:54.040
<v Chris Gammell>Yeah, yeah.

00:20:54.620 --> 00:21:01.040
<v Mark Morin>And they happened to have a major at our local community college that was laser electro-optics,

00:21:01.080 --> 00:21:05.200
<v Mark Morin>so I just decided I'd enroll in that, and that was the beginning.

00:21:06.720 --> 00:21:13.260
<v Mark Morin>But I was in a trade school for electronics before that, so, you know, my high school was a trade school.

00:21:13.260 --> 00:21:14.000
<v Mark Morin>Oh, gosh.

00:21:14.000 --> 00:21:20.940
<v Mark Morin>So I already kind of had the electronics bit handled for the most part, so it was a breeze to go through.

00:21:22.660 --> 00:21:28.920
<v Mark Morin>The electronics half of this major was not that much of a challenge, you know?

00:21:30.120 --> 00:21:36.520
<v Mark Morin>Actually, I think I was able to absorb some of the higher concept classes, like, you know,

00:21:36.520 --> 00:21:42.380
<v Mark Morin>you take a linear circuits class, and there's kids that are still trying to figure out whether, you know,

00:21:42.420 --> 00:21:43.800
<v Mark Morin>what series and parallel means.

00:21:43.960 --> 00:21:44.620
<v Mark Morin>Oh, yeah, yeah, yeah.

00:21:44.620 --> 00:21:49.400
<v Mark Morin>They're shoving op amps down your throat a month later, and, you know,

00:21:49.500 --> 00:21:53.900
<v Mark Morin>having the bassist from a trade school was actually a big help in kind of figuring that stuff out.

00:21:53.900 --> 00:21:54.080
<v Mark Morin>Oh, yes, huge.

00:21:54.420 --> 00:21:54.940
<v Chris Gammell>That's great.

00:21:55.620 --> 00:21:58.940
<v Chris Gammell>So the thing that really strikes me about this already, I mean, obviously,

00:21:59.120 --> 00:22:02.820
<v Chris Gammell>this is a very practical application of, you know, chemistry.

00:22:02.920 --> 00:22:04.580
<v Chris Gammell>Obviously, the periodic table, stuff like that.

00:22:04.580 --> 00:22:06.580
<v Chris Gammell>And that is great.

00:22:07.320 --> 00:22:10.300
<v Chris Gammell>You know, I mean, like, obviously, in the electronics field, we don't hear about that as much.

00:22:10.400 --> 00:22:12.600
<v Chris Gammell>But, you know, like, valence electrons matter, right?

00:22:12.640 --> 00:22:15.300
<v Chris Gammell>I mean, it happens in a lot of stuff, but it's...

00:22:15.300 --> 00:22:18.380
<v Dave Jones>Well, it happens at the semiconductor physics level.

00:22:18.380 --> 00:22:19.080
<v Dave Jones>Right, exactly.

00:22:19.180 --> 00:22:20.160
<v Dave Jones>In our industry.

00:22:20.320 --> 00:22:27.380
<v Dave Jones>But apart from that, no, we don't really, you know, most application engineers, you know, don't...

00:22:27.380 --> 00:22:28.900
<v Dave Jones>Which is the level we're at.

00:22:29.360 --> 00:22:34.080
<v Mark Morin>Would you ever buy, like, a germanium diode to get the right forward voltage, you know, like...

00:22:34.080 --> 00:22:35.120
<v Dave Jones>Oh, yeah, yeah, you would.

00:22:35.540 --> 00:22:38.640
<v Mark Morin>Like, germanium or silicon is maybe the only time you think about it.

00:22:38.640 --> 00:22:39.160
<v Mark Morin>Yeah, exactly.

00:22:39.400 --> 00:22:40.380
<v Dave Jones>That's about it, yeah.

00:22:41.380 --> 00:22:42.860
<v Chris Gammell>Yeah, and I mean, that's just kind of...

00:22:42.860 --> 00:22:45.100
<v Chris Gammell>That's almost like a branding thing as much as anything else.

00:22:45.100 --> 00:22:48.860
<v Chris Gammell>It's like, oh, I need this type instead of I need it because the valence, you know,

00:22:48.920 --> 00:22:51.220
<v Chris Gammell>you have to drop the different energy levels and stuff like that.

00:22:51.460 --> 00:22:51.540
<v Chris Gammell>Sure.

00:22:51.540 --> 00:22:53.080
<v Chris Gammell>No, it's really cool, though.

00:22:53.180 --> 00:22:54.260
<v Chris Gammell>And, like, that...

00:22:54.260 --> 00:22:56.040
<v Chris Gammell>I've talked to someone...

00:22:56.040 --> 00:23:00.500
<v Chris Gammell>Actually, one of my old bosses, he used to work on really high-speed oscillators.

00:23:00.740 --> 00:23:01.340
<v Chris Gammell>And he used to sort of...

00:23:01.340 --> 00:23:02.640
<v Chris Gammell>Kind of like the atterbium-type stuff.

00:23:02.900 --> 00:23:03.560
<v Chris Gammell>Or maybe it was atterbium.

00:23:03.800 --> 00:23:05.280
<v Chris Gammell>I don't remember at all.

00:23:05.300 --> 00:23:12.380
<v Chris Gammell>But, you know, like, just those really interesting, exotic-type materials that you need to use.

00:23:12.860 --> 00:23:13.540
<v Chris Gammell>So that...

00:23:13.540 --> 00:23:18.260
<v Chris Gammell>But that also drives, of course, the price up and very specialized equipment and everything.

00:23:18.260 --> 00:23:19.260
<v Chris Gammell>So...

00:23:19.260 --> 00:23:20.280
<v Mark Morin>Yeah, I can imagine.

00:23:21.500 --> 00:23:24.180
<v Dave Jones>So what are you doing at the...

00:23:24.180 --> 00:23:25.560
<v Dave Jones>So what are you actually doing there?

00:23:26.040 --> 00:23:30.420
<v Mark Morin>Oh, I design the circuit boards that control all this stuff.

00:23:31.980 --> 00:23:32.460
<v Mark Morin>Basically.

00:23:33.140 --> 00:23:35.500
<v Dave Jones>So he is one of us, folks.

00:23:35.900 --> 00:23:36.900
<v Dave Jones>He is one of us.

00:23:37.120 --> 00:23:37.300
<v Dave Jones>Yeah.

00:23:37.740 --> 00:23:39.180
<v Mark Morin>Domain knowledge around the other stuff.

00:23:40.160 --> 00:23:43.880
<v Mark Morin>Just because I've been immersed in it for 15 years, I've absorbed all this nonsense.

00:23:43.880 --> 00:23:44.080
<v Mark Morin>Right.

00:23:44.080 --> 00:23:48.200
<v Mark Morin>But day-to-day, I'm driving a seat of Altium.

00:23:49.040 --> 00:23:49.440
<v Mark Morin>Right.

00:23:49.680 --> 00:23:49.840
<v Mark Morin>Nice.

00:23:49.860 --> 00:23:57.580
<v Mark Morin>You know, or I'm down in the lab actually cobbling together some prototype board to try and prove out whatever we're trying to do that week, you know?

00:23:57.720 --> 00:23:57.920
<v Mark Morin>Yeah.

00:23:58.900 --> 00:23:59.920
<v Mark Morin>For the most part.

00:24:00.080 --> 00:24:02.560
<v Chris Gammell>So you said there's two different pieces to your business here, right?

00:24:02.580 --> 00:24:04.560
<v Chris Gammell>So there is the actual making of the fiber.

00:24:04.680 --> 00:24:07.340
<v Chris Gammell>But then you said there's, like, the amplifier side and the stuff that you're building.

00:24:07.560 --> 00:24:11.160
<v Chris Gammell>So what are some of, like, the device types that you're building at a high level?

00:24:11.160 --> 00:24:17.160
<v Mark Morin>So we have a NuQ laser, which is a pulsed laser.

00:24:17.360 --> 00:24:30.880
<v Mark Morin>So if you've bought an 0603 chip resistor, this is the kind of laser that etches the die and then actually, you know, scrubs off the carbon resistive element.

00:24:31.680 --> 00:24:31.820
<v Mark Morin>Oh.

00:24:32.000 --> 00:24:32.580
<v Mark Morin>I've been to the –

00:24:32.580 --> 00:24:33.400
<v Mark Morin>Ah, right.

00:24:33.400 --> 00:24:34.420
<v Chris Gammell>So the laser trimming you're saying.

00:24:34.520 --> 00:24:35.380
<v Chris Gammell>That's what – yeah, like the trimming.

00:24:35.540 --> 00:24:35.880
<v Mark Morin>Oh, yeah.

00:24:35.980 --> 00:24:36.180
<v Mark Morin>Yeah.

00:24:36.180 --> 00:24:36.300
<v Mark Morin>Yeah.

00:24:36.700 --> 00:24:38.300
<v Mark Morin>I've been to the factory where they do that.

00:24:38.360 --> 00:24:43.260
<v Mark Morin>It's really neat to watch for about three minutes and then it's incredibly boring for the rest of the time.

00:24:43.280 --> 00:24:43.640
<v Mark Morin>Yeah, right.

00:24:43.640 --> 00:24:54.680
<v Mark Morin>But it's a little ceramic wafer kind of gets vacuumed in onto a tray and then the laser goes blam and then everything's kind of etched into a grid, right?

00:24:54.880 --> 00:25:03.660
<v Mark Morin>And then they deposit carbon on it and then the thing sits there and, like, two flying lead probes come down and actually measure the resistance while it etches away carbon.

00:25:03.760 --> 00:25:04.240
<v Mark Morin>It's really neat.

00:25:04.500 --> 00:25:04.640
<v Chris Gammell>Oh.

00:25:04.820 --> 00:25:07.160
<v Chris Gammell>So it's, like, that dynamic where it actually is –

00:25:07.160 --> 00:25:08.100
<v Mark Morin>Oh, it's unreal.

00:25:08.220 --> 00:25:08.340
<v Mark Morin>Yeah.

00:25:08.440 --> 00:25:09.860
<v Mark Morin>How, like, live it is.

00:25:09.860 --> 00:25:12.680
<v Chris Gammell>I always assumed it would be, like, with resistors and stuff like that.

00:25:12.720 --> 00:25:16.460
<v Chris Gammell>It was just an amount of material type thing or is this for, like, just the super precise ones?

00:25:16.940 --> 00:25:20.360
<v Mark Morin>To be fair, I think those were, like, 0.01% resistors.

00:25:20.460 --> 00:25:22.640
<v Chris Gammell>The stuff that we're paying for out the wazoo anyway.

00:25:22.900 --> 00:25:23.140
<v Chris Gammell>Right.

00:25:23.460 --> 00:25:34.500
<v Mark Morin>So the – I think the – even the 1%ers are just – it etches whatever it etches for 100K and then it just breaks the wafer up and they put leads on it, right?

00:25:34.640 --> 00:25:34.860
<v Chris Gammell>Yeah.

00:25:35.760 --> 00:25:36.280
<v Chris Gammell>That's pretty cool.

00:25:36.280 --> 00:25:36.500
<v Mark Morin>Yeah.

00:25:36.500 --> 00:25:41.960
<v Dave Jones>And then they sort them afterwards because it's just – you know, it's just not worth trimming, you know?

00:25:42.000 --> 00:25:42.280
<v Dave Jones>Sure.

00:25:42.840 --> 00:25:46.920
<v Mark Morin>And then there's, you know, applications like metal engraving and etching.

00:25:47.600 --> 00:25:52.440
<v Mark Morin>You know, if you have a serial number in the side of something, they don't do that with an engraving tool anymore.

00:25:52.540 --> 00:25:53.620
<v Mark Morin>They just do that with a laser.

00:25:54.180 --> 00:25:54.440
<v Speaker ?>Huh.

00:25:54.920 --> 00:25:55.860
<v Mark Morin>Take zero time.

00:25:55.860 --> 00:25:56.920
<v Dave Jones>I've actually seen that.

00:25:57.000 --> 00:26:07.740
<v Dave Jones>Like, if you look at those micro photographs of dyes, right, you can actually see that the – that, like, you know, there might be some logo or something.

00:26:07.860 --> 00:26:13.320
<v Dave Jones>It's, like, obviously been, like, laser etched into the dye rather than chemically etched.

00:26:13.320 --> 00:26:13.520
<v Dave Jones>Sure.

00:26:13.560 --> 00:26:15.680
<v Dave Jones>Because it just looks different, you know?

00:26:15.760 --> 00:26:17.440
<v Dave Jones>It doesn't look chemically processed.

00:26:17.560 --> 00:26:20.340
<v Dave Jones>It looks like it's been burned in, you know, with the laser.

00:26:20.340 --> 00:26:22.500
<v Mark Morin>And sometimes you can see the dots.

00:26:22.600 --> 00:26:24.440
<v Mark Morin>It will almost look like a dot matrix printer.

00:26:24.820 --> 00:26:24.960
<v Mark Morin>Mm-hmm.

00:26:24.960 --> 00:26:25.440
<v Mark Morin>Right.

00:26:25.660 --> 00:26:39.700
<v Mark Morin>Put it down, you know, if it's moving really fast where the laser pulses are coming out at a rate that's comparable to the speed of the actual, you know, transom or whatever they're using.

00:26:39.700 --> 00:26:52.240
<v Mark Morin>Oh, it's a – well, a system that uses an X-Y table, right, where you have a fixed optical piece and then a table that moves around under it, that kind of stuff is not fast enough for that.

00:26:52.380 --> 00:26:52.940
<v Mark Morin>But there's a –

00:26:52.940 --> 00:26:53.280
<v Mark Morin>Of course.

00:26:53.280 --> 00:27:00.120
<v Mark Morin>A device called a Galvo that is basically three mirrors that move really fast, right?

00:27:00.160 --> 00:27:03.920
<v Mark Morin>So your scan speed can be millimeters or centimeters per second.

00:27:04.240 --> 00:27:08.780
<v Mark Morin>That kind of stuff, you can get dot resolution out of these lasers.

00:27:09.300 --> 00:27:09.640
<v Dave Jones>Wow.

00:27:09.700 --> 00:27:10.740
<v Mark Morin>And it actually looks pretty neat.

00:27:10.880 --> 00:27:20.800
<v Mark Morin>So, like, we have a test pattern that's a bunch of dots and they're all arranged in a perfect grid so you can tell if there's, you know, dots off from where they're supposed to be.

00:27:21.160 --> 00:27:25.620
<v Mark Morin>You can tell that your electronics design is messed up somewhere.

00:27:25.780 --> 00:27:26.280
<v Dave Jones>Yeah, exactly.

00:27:27.560 --> 00:27:30.000
<v Dave Jones>And a dummy question, but is that –

00:27:30.000 --> 00:27:30.720
<v Dave Jones>I've got one of those too.

00:27:32.320 --> 00:27:32.720
<v Dave Jones>Shoot.

00:27:32.720 --> 00:27:36.720
<v Dave Jones>Is that every laser or is that a specific pulsed laser?

00:27:36.800 --> 00:27:39.360
<v Mark Morin>That's the specific NuQ pulsed laser.

00:27:39.360 --> 00:27:39.760
<v Mark Morin>Right.

00:27:39.760 --> 00:27:40.140
<v Mark Morin>Does that.

00:27:40.140 --> 00:27:40.220
<v Mark Morin>Okay.

00:27:40.320 --> 00:27:42.640
<v Mark Morin>So, you know, your operation range –

00:27:42.640 --> 00:27:45.120
<v Dave Jones>Because most people think about, like, laser is just on.

00:27:45.340 --> 00:27:45.680
<v Dave Jones>That's it.

00:27:45.720 --> 00:27:46.360
<v Dave Jones>It's not pulse.

00:27:46.480 --> 00:27:47.500
<v Dave Jones>They think it's just on.

00:27:47.820 --> 00:27:49.800
<v Chris Gammell>Yeah, lasers are meant to kill James Bond, right?

00:27:49.880 --> 00:27:50.780
<v Chris Gammell>That's what they're supposed to use.

00:27:50.780 --> 00:27:51.380
<v Mark Morin>Exactly, right.

00:27:51.460 --> 00:27:54.260
<v Mark Morin>You run it across a table at a spy's crotch.

00:27:54.500 --> 00:27:55.180
<v Mark Morin>Slowly, slowly, though.

00:27:55.620 --> 00:27:58.400
<v Mark Morin>And walk out of the room after you've told them your entire plan, right?

00:27:58.400 --> 00:27:58.680
<v Mark Morin>That's right.

00:28:01.200 --> 00:28:02.340
<v Chris Gammell>That's how you haze your interns.

00:28:02.440 --> 00:28:02.760
<v Chris Gammell>Is that right?

00:28:03.240 --> 00:28:03.980
<v Chris Gammell>Yes, exactly.

00:28:04.680 --> 00:28:06.220
<v Dave Jones>And follow-up question.

00:28:06.740 --> 00:28:09.040
<v Dave Jones>Why do you pulse the laser?

00:28:09.800 --> 00:28:12.620
<v Mark Morin>Oh, the peak power.

00:28:12.800 --> 00:28:15.260
<v Mark Morin>So if you're – like the NuQ, for example.

00:28:15.440 --> 00:28:16.060
<v Dave Jones>Ah, chip out, right, yeah.

00:28:16.180 --> 00:28:16.400
<v Mark Morin>Right.

00:28:16.500 --> 00:28:20.880
<v Mark Morin>Your average power is 20, 30, or 50 watts depending on the model.

00:28:20.900 --> 00:28:21.280
<v Mark Morin>Got it.

00:28:21.280 --> 00:28:29.440
<v Mark Morin>But if you're running at 50 kilohertz, your peak power is kilowatts, you know?

00:28:29.520 --> 00:28:29.700
<v Mark Morin>Right.

00:28:29.700 --> 00:28:36.800
<v Mark Morin>So the damage threshold of the surface of the material you're attacking is some number, right?

00:28:36.880 --> 00:28:38.580
<v Mark Morin>And you want to melt it.

00:28:39.100 --> 00:28:44.100
<v Mark Morin>And if you can just shoot a pulse in a short enough time, it'll just melt the surface or evaporate it.

00:28:44.120 --> 00:28:44.860
<v Mark Morin>It just goes away.

00:28:46.120 --> 00:28:49.680
<v Dave Jones>Oh, I know one thing we can get into that a lot of people might –

00:28:49.680 --> 00:28:50.380
<v Chris Gammell>Can I ask my dumb question first, though?

00:28:50.380 --> 00:28:52.220
<v Chris Gammell>You can ask your dumb question, then I'll get into it.

00:28:52.240 --> 00:28:53.860
<v Chris Gammell>So you mentioned the galvos and the mirrors.

00:28:54.160 --> 00:28:55.260
<v Chris Gammell>I've always wondered this.

00:28:55.680 --> 00:28:58.240
<v Chris Gammell>How does a laser bounce off a mirror?

00:28:58.340 --> 00:29:02.540
<v Chris Gammell>I know that's a really basic question, but like why doesn't it etch the mirror?

00:29:02.960 --> 00:29:04.460
<v Chris Gammell>Is it about the focal length or something?

00:29:04.460 --> 00:29:13.340
<v Mark Morin>Well, because the mirror is made of a material that's reflective at the wavelength you're using, hopefully, or it'll wear out pretty fast, right?

00:29:13.420 --> 00:29:14.020
<v Mark Morin>Yeah, you're right, yeah.

00:29:14.540 --> 00:29:19.980
<v Mark Morin>The material you're shooting at, you know, like copper at 1064 is very reflective.

00:29:19.980 --> 00:29:23.000
<v Mark Morin>So if you're trying to etch copper, you have to get a lot more energy.

00:29:23.760 --> 00:29:27.280
<v Mark Morin>But like aluminum is pretty susceptible, right?

00:29:27.320 --> 00:29:29.760
<v Mark Morin>So you can etch aluminum very easily.

00:29:30.140 --> 00:29:33.960
<v Chris Gammell>And what determines the material's susceptibility to different wavelengths then?

00:29:34.040 --> 00:29:34.400
<v Chris Gammell>Is that just basically –

00:29:34.400 --> 00:29:34.640
<v Chris Gammell>I'm glad.

00:29:34.960 --> 00:29:35.140
<v Chris Gammell>Yeah.

00:29:35.340 --> 00:29:37.680
<v Mark Morin>That's a whole other science on its own.

00:29:37.680 --> 00:29:38.980
<v Mark Morin>That's another podcast as well.

00:29:39.200 --> 00:29:39.400
<v Mark Morin>Yeah.

00:29:40.440 --> 00:29:44.360
<v Mark Morin>It's all empirical testing to me, but like I'm sure there's people that can figure that out.

00:29:44.480 --> 00:29:45.280
<v Chris Gammell>Yeah, that one blew up.

00:29:46.880 --> 00:29:47.240
<v Mark Morin>Exactly.

00:29:47.720 --> 00:29:49.180
<v Mark Morin>But like, hey, this isn't doing anything.

00:29:49.300 --> 00:29:50.920
<v Mark Morin>I wonder what's going on here, right?

00:29:50.920 --> 00:29:51.180
<v Mark Morin>Huh.

00:29:51.360 --> 00:29:51.600
<v Mark Morin>Okay.

00:29:52.440 --> 00:29:54.040
<v Chris Gammell>No, that's really interesting stuff.

00:29:54.040 --> 00:29:57.420
<v Chris Gammell>I just have no idea where that comes from.

00:29:57.700 --> 00:30:02.700
<v Chris Gammell>So you could have something that just isn't susceptible at a certain wavelength.

00:30:03.180 --> 00:30:08.160
<v Chris Gammell>Like if – so if like a plastic wasn't susceptible at a certain wavelength, I realize that's probably not the case.

00:30:08.260 --> 00:30:08.960
<v Chris Gammell>But if it wasn't –

00:30:08.960 --> 00:30:09.060
<v Chris Gammell>No.

00:30:09.060 --> 00:30:19.380
<v Dave Jones>A silver mirror, for example, like a regular mirror might be silver-backed and silver might not be, you know, absorb-ive.

00:30:19.880 --> 00:30:20.620
<v Dave Jones>Yes, exactly.

00:30:20.860 --> 00:30:22.000
<v Dave Jones>Absorb-ive, I guess you'd say.

00:30:22.700 --> 00:30:24.780
<v Dave Jones>If that's a word, at that wavelength.

00:30:24.980 --> 00:30:25.420
<v Dave Jones>Right.

00:30:25.420 --> 00:30:26.580
<v Dave Jones>So it might just reflect it.

00:30:26.700 --> 00:30:26.820
<v Mark Morin>Yep.

00:30:27.260 --> 00:30:29.820
<v Mark Morin>So like plywood is a good example.

00:30:30.080 --> 00:30:30.880
<v Mark Morin>Or CO2.

00:30:31.120 --> 00:30:31.480
<v Mark Morin>Right.

00:30:31.700 --> 00:30:36.220
<v Mark Morin>But like your plywood sheet, that 8x4 sheet you pick up at Home Depot is cut with a CO2 laser.

00:30:36.760 --> 00:30:36.940
<v Mark Morin>Yep.

00:30:36.960 --> 00:30:38.020
<v Mark Morin>In almost every factory.

00:30:38.020 --> 00:30:39.340
<v Mark Morin>There's no saw cutting this, right?

00:30:39.900 --> 00:30:42.580
<v Mark Morin>And the CO2 can burn plywood.

00:30:42.700 --> 00:30:48.360
<v Mark Morin>If you put it under that Nu-Q laser at 1064, it's not going to do anything.

00:30:48.720 --> 00:30:51.000
<v Mark Morin>You know, you could run it for an hour and maybe start seeing a spot.

00:30:51.120 --> 00:30:53.680
<v Mark Morin>But there's not a high damage threshold there.

00:30:53.920 --> 00:30:54.260
<v Dave Jones>Got it.

00:30:54.400 --> 00:31:01.000
<v Dave Jones>Even though that's a big-ass 50-watt kilowatt peak laser, it still doesn't do anything.

00:31:01.520 --> 00:31:01.680
<v Chris Gammell>Right.

00:31:02.120 --> 00:31:02.300
<v Chris Gammell>Yep.

00:31:02.420 --> 00:31:05.500
<v Chris Gammell>So it matters power plus wavelength.

00:31:05.620 --> 00:31:05.900
<v Chris Gammell>Wavelength.

00:31:05.900 --> 00:31:06.020
<v Chris Gammell>Right.

00:31:06.480 --> 00:31:06.760
<v Mark Morin>Yes.

00:31:06.760 --> 00:31:07.220
<v Mark Morin>Interesting.

00:31:07.220 --> 00:31:08.780
<v Mark Morin>So you're – yeah.

00:31:08.900 --> 00:31:11.440
<v Mark Morin>It's like you have some thermal coefficient of absorption, right?

00:31:11.480 --> 00:31:13.920
<v Mark Morin>And you get enough heat in the surface and it starts going away.

00:31:14.260 --> 00:31:19.240
<v Mark Morin>And if you're not absorbing it at a high enough rate, you're just not doing any damage.

00:31:20.100 --> 00:31:21.660
<v Dave Jones>Ah, physics for the win.

00:31:22.340 --> 00:31:22.760
<v Dave Jones>Sure.

00:31:23.500 --> 00:31:23.700
<v Dave Jones>Yep.

00:31:24.280 --> 00:31:24.820
<v Dave Jones>All right.

00:31:26.360 --> 00:31:27.900
<v Dave Jones>Laser drivers.

00:31:28.620 --> 00:31:28.900
<v Dave Jones>Yeah.

00:31:28.900 --> 00:31:31.000
<v Dave Jones>Because there's a lot of – yeah.

00:31:31.000 --> 00:31:34.420
<v Dave Jones>Because there's a lot of – it's almost like a black art.

00:31:34.540 --> 00:31:35.620
<v Dave Jones>Oh, laser drivers.

00:31:35.760 --> 00:31:40.780
<v Dave Jones>They've got a – you know, there's special requirements for laser driver circuitry.

00:31:41.080 --> 00:31:44.940
<v Dave Jones>And I'm sure you could – I'm guessing you can tell us all about that.

00:31:46.940 --> 00:31:47.380
<v Dave Jones>Sure.

00:31:47.380 --> 00:31:48.160
<v Dave Jones>Well, something.

00:31:48.720 --> 00:31:49.080
<v Dave Jones>Yes.

00:31:49.340 --> 00:31:50.560
<v Dave Jones>So, yeah.

00:31:50.860 --> 00:31:52.500
<v Dave Jones>What is the problem, first of all?

00:31:52.600 --> 00:31:55.520
<v Dave Jones>Like, everyone – like, I see this on the forum all the time.

00:31:55.580 --> 00:32:00.120
<v Dave Jones>I'm trying to design this laser driver, but you've got to have super high peak currents,

00:32:00.260 --> 00:32:00.620
<v Dave Jones>blah, blah, blah.

00:32:00.740 --> 00:32:02.340
<v Dave Jones>Tell us what the issues are.

00:32:02.340 --> 00:32:04.720
<v Mark Morin>Well, it depends what you're trying to do.

00:32:05.440 --> 00:32:14.960
<v Mark Morin>If you wanted to make a – you know, you go online and you find all these, like, eval boards for laser drivers and –

00:32:14.960 --> 00:32:15.140
<v Chris Gammell>Mm-hmm.

00:32:15.800 --> 00:32:16.180
<v Chris Gammell>Sorry.

00:32:16.240 --> 00:32:17.100
<v Chris Gammell>What is a laser driver?

00:32:17.220 --> 00:32:18.180
<v Chris Gammell>I guess I'm sorry.

00:32:18.260 --> 00:32:18.700
<v Chris Gammell>I don't –

00:32:18.700 --> 00:32:23.000
<v Mark Morin>Well, you just – it's – well, there's laser diodes, right?

00:32:23.180 --> 00:32:28.320
<v Mark Morin>And they – you just pump current through it and you get photons out is the most basic explanation.

00:32:28.520 --> 00:32:30.920
<v Mark Morin>You know, that's like a transducer, I suppose you'd say.

00:32:30.920 --> 00:32:31.200
<v Mark Morin>Sure.

00:32:31.200 --> 00:32:34.880
<v Dave Jones>So they're current-driven devices, just like –

00:32:34.880 --> 00:32:35.220
<v Dave Jones>Yes.

00:32:35.500 --> 00:32:38.440
<v Chris Gammell>So electrical current turns into photons through this diode.

00:32:38.540 --> 00:32:38.800
<v Chris Gammell>Right.

00:32:38.860 --> 00:32:39.040
<v Chris Gammell>Yeah.

00:32:39.180 --> 00:32:45.500
<v Mark Morin>And there's a bunch of challenges with switching on and off laser diodes.

00:32:46.460 --> 00:32:50.660
<v Mark Morin>Like, when you cross the lasing thresholds, you get this relaxation oscillation.

00:32:51.120 --> 00:32:53.720
<v Mark Morin>That creep makes a little spike, right?

00:32:53.840 --> 00:32:57.800
<v Mark Morin>So if you just want to shoot a laser diode into a wall, it's really not that complicated.

00:32:57.800 --> 00:33:07.200
<v Mark Morin>But if you want to start amplifying it in a fiber system, you can't have all these spikes coming out of the laser every time you turn it on and off, right?

00:33:07.200 --> 00:33:13.660
<v Mark Morin>So you have to have a pretty well under control current source without overshoot or –

00:33:13.660 --> 00:33:14.460
<v Mark Morin>Right.

00:33:14.540 --> 00:33:17.760
<v Dave Jones>Because it's basically a current source you're switching off and on.

00:33:17.840 --> 00:33:23.060
<v Dave Jones>And when you switch a current source off and on, you can have issues, especially if it's a large current source.

00:33:23.060 --> 00:33:23.420
<v Dave Jones>Oh, yeah.

00:33:23.800 --> 00:33:27.860
<v Mark Morin>And you're talking on the low end, you know, 10 amps or so.

00:33:27.920 --> 00:33:29.920
<v Mark Morin>And on the high end, a lot higher.

00:33:30.080 --> 00:33:30.340
<v Dave Jones>Yeah.

00:33:30.340 --> 00:33:33.540
<v Dave Jones>And you've got to switch them fast too, you know.

00:33:33.540 --> 00:33:35.600
<v Mark Morin>Well, this is where you get all the problems, right?

00:33:35.720 --> 00:33:37.680
<v Dave Jones>Everybody can turn one on and –

00:33:37.680 --> 00:33:38.180
<v Mark Morin>And one switch –

00:33:38.180 --> 00:33:39.320
<v Dave Jones>Leaving it on.

00:33:39.520 --> 00:33:40.560
<v Dave Jones>One hertz, right?

00:33:40.620 --> 00:33:42.120
<v Dave Jones>You switch it with a switch and on.

00:33:42.200 --> 00:33:46.260
<v Mark Morin>We have a 500 millisecond rise time and it's critically damped and everything's beautiful.

00:33:46.260 --> 00:33:52.000
<v Mark Morin>But if you want to, you know, switch it kilohertz or faster, then you have to do a lot of things.

00:33:52.000 --> 00:33:57.880
<v Mark Morin>And I'm sure you guys understand we can't drill too deep into this.

00:33:58.180 --> 00:33:58.660
<v Mark Morin>Oh, yeah.

00:33:59.020 --> 00:33:59.340
<v Mark Morin>That's okay.

00:33:59.340 --> 00:33:59.700
<v Dave Jones>No, no.

00:33:59.760 --> 00:34:00.920
<v Dave Jones>We just want generics.

00:34:01.160 --> 00:34:08.420
<v Dave Jones>Like, you know, do you have to use – you know, is it hard to get special purpose – do you have to use special purpose transistors to end up doing it?

00:34:08.460 --> 00:34:10.280
<v Dave Jones>Because, you know –

00:34:10.280 --> 00:34:10.980
<v Mark Morin>Not really.

00:34:11.300 --> 00:34:11.960
<v Mark Morin>It's a –

00:34:11.960 --> 00:34:12.120
<v Mark Morin>No?

00:34:12.640 --> 00:34:15.840
<v Mark Morin>You can use almost a standard DC to DC converter –

00:34:15.840 --> 00:34:16.460
<v Mark Morin>Right.

00:34:17.000 --> 00:34:21.700
<v Mark Morin>Architecture to make your power supply and, you know, a linear –

00:34:21.700 --> 00:34:24.900
<v Mark Morin>Almost an audio type transistor would give you a –

00:34:24.900 --> 00:34:25.200
<v Mark Morin>Okay.

00:34:25.300 --> 00:34:28.180
<v Mark Morin>You want to have a nice analog region you can control in your –

00:34:28.180 --> 00:34:28.500
<v Mark Morin>Mm-hmm.

00:34:29.000 --> 00:34:31.440
<v Mark Morin>In your transistor, right?

00:34:31.460 --> 00:34:33.940
<v Mark Morin>You don't want to be just smashing into saturation.

00:34:34.360 --> 00:34:34.720
<v Mark Morin>Right.

00:34:35.660 --> 00:34:36.020
<v Mark Morin>Yeah.

00:34:36.180 --> 00:34:38.800
<v Mark Morin>Depending on your circuit that you have set up to do this, but –

00:34:38.800 --> 00:34:42.880
<v Chris Gammell>Does that mean – well, that would require like – so if you had – I'm just like imagining this in my head.

00:34:42.880 --> 00:34:47.680
<v Chris Gammell>So you have a FET that's switching into a diode like that and then you're going to want some kind of feedback there.

00:34:47.680 --> 00:34:55.600
<v Chris Gammell>Does that mean you have feedback that's – you're using nonlinear feedback then because you're basically monitoring the diode voltage then?

00:34:55.860 --> 00:34:56.260
<v Chris Gammell>Is that the idea?

00:34:56.380 --> 00:34:58.600
<v Dave Jones>Well, you've got to generate a constant current.

00:34:58.740 --> 00:34:59.960
<v Dave Jones>You've got to remember it's not a –

00:34:59.960 --> 00:34:59.880
<v Speaker ?>Right.

00:35:00.260 --> 00:35:01.680
<v Dave Jones>It's a constant current generator.

00:35:02.080 --> 00:35:04.460
<v Mark Morin>You would use some kind of current feedback loop into your –

00:35:04.460 --> 00:35:04.880
<v Chris Gammell>Okay.

00:35:04.880 --> 00:35:05.600
<v Mark Morin>Control.

00:35:06.080 --> 00:35:06.400
<v Chris Gammell>Gotcha.

00:35:06.760 --> 00:35:06.960
<v Chris Gammell>Gotcha.

00:35:07.060 --> 00:35:07.820
<v Mark Morin>Element, right?

00:35:07.880 --> 00:35:10.120
<v Mark Morin>Whether you're using an op amp or something else.

00:35:10.320 --> 00:35:20.780
<v Mark Morin>And you would feed the current back and then use your feedback to kind of dampen your signal and hopefully not dampen it so much that your rise time is useless.

00:35:21.100 --> 00:35:21.380
<v Mark Morin>Right.

00:35:22.760 --> 00:35:23.120
<v Dave Jones>Yeah.

00:35:23.720 --> 00:35:25.600
<v Chris Gammell>But at the same time, you have to –

00:35:25.600 --> 00:35:29.100
<v Chris Gammell>We've replicated a 56K connection on this fibrillistic system.

00:35:29.100 --> 00:35:35.440
<v Dave Jones>And look, this loop is really stable but – oh, geez, the rise time is half a second.

00:35:35.640 --> 00:35:35.740
<v Dave Jones>Yeah.

00:35:35.860 --> 00:35:37.300
<v Dave Jones>But it's really stable.

00:35:37.420 --> 00:35:37.880
<v Dave Jones>Super stable.

00:35:37.880 --> 00:35:38.700
<v Dave Jones>You know, it's not going to oscillate.

00:35:38.940 --> 00:35:39.100
<v Mark Morin>Yeah.

00:35:39.100 --> 00:35:40.180
<v Mark Morin>Yeah, exactly.

00:35:40.520 --> 00:35:41.980
<v Mark Morin>And that's fine for some stuff.

00:35:42.100 --> 00:35:47.000
<v Mark Morin>You know, some laser sources you just want to turn on and leave on all the time and that's fine.

00:35:47.640 --> 00:35:52.760
<v Mark Morin>And then there's some things that you want to go fast and you have to have really good control over everything.

00:35:53.100 --> 00:35:54.100
<v Mark Morin>So –

00:35:54.100 --> 00:35:55.180
<v Chris Gammell>That is great.

00:35:55.240 --> 00:35:56.740
<v Chris Gammell>Yeah, that's interesting stuff.

00:35:56.740 --> 00:36:07.800
<v Dave Jones>Now, you've been involved in lots of – you're doing production and qualification testing and burning and stuff like that as well.

00:36:07.800 --> 00:36:16.380
<v Mark Morin>So we had this – well, I don't know if you want to lead into this RF design story here.

00:36:16.760 --> 00:36:17.020
<v Mark Morin>Yeah.

00:36:17.280 --> 00:36:17.760
<v Mark Morin>Sure.

00:36:18.200 --> 00:36:18.480
<v Mark Morin>Why not?

00:36:18.600 --> 00:36:19.800
<v Mark Morin>We have a –

00:36:19.800 --> 00:36:21.600
<v Dave Jones>This is an electronic show.

00:36:21.600 --> 00:36:28.520
<v Mark Morin>Yes, which is – I kind of wrote this out because I was thinking that this would be electronics focused as we could get here.

00:36:29.480 --> 00:36:40.660
<v Mark Morin>We had this – well, in the new Q laser, the way you switch it, right, to get a pulse is there's an element called an AOM, which is an acousto-optic modulator.

00:36:40.780 --> 00:36:41.400
<v Mark Morin>So it's a crystal.

00:36:41.620 --> 00:36:42.700
<v Mark Morin>You put in 150 –

00:36:42.700 --> 00:36:44.660
<v Mark Morin>Sounds like something that Ghostbusters would use.

00:36:44.660 --> 00:36:45.060
<v Mark Morin>That's right.

00:36:45.060 --> 00:36:45.740
<v Mark Morin>Something like that.

00:36:46.780 --> 00:36:48.400
<v Mark Morin>It's on the proton pack somewhere.

00:36:48.440 --> 00:36:48.780
<v Mark Morin>That's right.

00:36:50.980 --> 00:37:00.540
<v Mark Morin>You know, you put 150 megahertz in it at a couple of watts and you get a lower optical insertion loss, right?

00:37:00.600 --> 00:37:03.140
<v Mark Morin>So it's like you – it's kind of like a FET in electronics.

00:37:04.300 --> 00:37:05.340
<v Chris Gammell>Could you – so –

00:37:05.340 --> 00:37:05.560
<v Chris Gammell>Wait.

00:37:06.040 --> 00:37:07.060
<v Chris Gammell>Optical insertion loss?

00:37:07.100 --> 00:37:08.140
<v Chris Gammell>Could you define that too, please?

00:37:08.140 --> 00:37:08.540
<v Chris Gammell>Right.

00:37:09.160 --> 00:37:15.640
<v Mark Morin>So you're kind of like a CB radio, like the insertion loss of your cable to your antenna, right?

00:37:16.100 --> 00:37:16.460
<v Chris Gammell>Gotcha.

00:37:16.640 --> 00:37:19.140
<v Chris Gammell>It's like the matching of two things, that kind of thing.

00:37:19.200 --> 00:37:19.360
<v Mark Morin>Right.

00:37:19.400 --> 00:37:27.680
<v Mark Morin>It's like 60 dB when you have no RF going into it and then the loss goes down to 1 dB when you put a bunch of RF into it.

00:37:28.940 --> 00:37:30.120
<v Mark Morin>Do you get what I'm saying here?

00:37:30.360 --> 00:37:31.120
<v Mark Morin>I think so.

00:37:31.120 --> 00:37:32.340
<v Mark Morin>I probably not.

00:37:32.340 --> 00:37:43.580
<v Mark Morin>If you're putting 10 dB in or 10 dBm in, right, and you have the AOM switched off, you're going to get minus 50 dBm out.

00:37:43.880 --> 00:37:47.440
<v Mark Morin>And then when you switch the AOM on, you're going to get 9 dBm out.

00:37:47.980 --> 00:37:49.500
<v Chris Gammell>So it's like a – it's a matching system.

00:37:49.600 --> 00:37:50.100
<v Chris Gammell>That's the idea.

00:37:50.300 --> 00:37:51.000
<v Chris Gammell>So it –

00:37:51.000 --> 00:37:53.400
<v Mark Morin>It's more like a gate, to be honest with you.

00:37:53.540 --> 00:37:54.180
<v Mark Morin>Oh, interesting.

00:37:54.360 --> 00:38:00.180
<v Mark Morin>It's just – it's stopping photons from flowing through when you don't give it an RF signal.

00:38:00.820 --> 00:38:01.700
<v Mark Morin>Oh, interesting.

00:38:02.340 --> 00:38:06.760
<v Mark Morin>So that crystal basically controls the entire laser.

00:38:06.940 --> 00:38:14.140
<v Mark Morin>If that thing shuts off for too long and all your pump diodes are running, all of those fibers will just burn themselves up because they'll have too much energy.

00:38:15.460 --> 00:38:15.700
<v Mark Morin>Wow.

00:38:16.360 --> 00:38:21.460
<v Chris Gammell>Do you ever feel like a wizard where you're like, oh, yes, today I was controlling the crystal and then I –

00:38:21.460 --> 00:38:24.540
<v Mark Morin>If you start explaining it like this, yeah, it sounds like that.

00:38:24.760 --> 00:38:27.160
<v Mark Morin>I put on my robe and my wizard hat.

00:38:27.980 --> 00:38:30.560
<v Mark Morin>Day to day, it's a lot simpler than it sounds.

00:38:30.560 --> 00:38:35.260
<v Dave Jones>And I walk around with a cane with a big crystal on the end of it.

00:38:35.520 --> 00:38:35.860
<v Dave Jones>Sure.

00:38:36.260 --> 00:38:36.820
<v Chris Gammell>Sorry.

00:38:37.040 --> 00:38:40.000
<v Chris Gammell>We're just super immature and have no idea what you're talking about.

00:38:40.140 --> 00:38:42.680
<v Chris Gammell>So this is what we do when we're confused and scared.

00:38:42.680 --> 00:38:49.860
<v Mark Morin>So basically you drive this thing with a CB radio circuit, right?

00:38:49.940 --> 00:38:50.300
<v Chris Gammell>Interesting.

00:38:50.480 --> 00:38:50.640
<v Chris Gammell>OK.

00:38:50.780 --> 00:38:54.400
<v Mark Morin>So it's an old Motorola transistor, an MRF 553.

00:38:55.100 --> 00:38:58.280
<v Mark Morin>Went obsolete in 2012, right?

00:38:58.660 --> 00:38:58.920
<v Mark Morin>Uh-huh.

00:38:59.000 --> 00:39:01.060
<v Mark Morin>And we started to try and –

00:39:01.060 --> 00:39:01.780
<v Mark Morin>Everyone panicked.

00:39:02.220 --> 00:39:02.540
<v Mark Morin>Oh, yeah.

00:39:02.560 --> 00:39:03.400
<v Mark Morin>I'm sure they did.

00:39:03.400 --> 00:39:08.180
<v Mark Morin>And everybody was at the same time trying to get their last time buys in.

00:39:08.480 --> 00:39:08.760
<v Mark Morin>Yeah.

00:39:09.160 --> 00:39:09.460
<v Mark Morin>Right.

00:39:09.460 --> 00:39:18.520
<v Mark Morin>And we got some and we immediately started to redesign the board to find a replacement for this thing because it's kind of –

00:39:18.520 --> 00:39:23.780
<v Mark Morin>I don't know if you remember these things, it looks like a cross where there's like four leads coming out.

00:39:23.880 --> 00:39:24.460
<v Dave Jones>Oh, yes.

00:39:24.540 --> 00:39:25.020
<v Dave Jones>Yes, I know.

00:39:25.020 --> 00:39:26.740
<v Dave Jones>And there's a little circular package in the middle.

00:39:26.900 --> 00:39:27.120
<v Dave Jones>Yep.

00:39:27.120 --> 00:39:27.300
<v Dave Jones>Right?

00:39:27.440 --> 00:39:27.600
<v Mark Morin>Yep.

00:39:27.700 --> 00:39:27.800
<v Mark Morin>Yep.

00:39:27.800 --> 00:39:30.360
<v Mark Morin>There's a hole drilled in the board that the thing kind of sits in the pocket.

00:39:31.100 --> 00:39:31.280
<v Dave Jones>Yep.

00:39:31.280 --> 00:39:31.420
<v Dave Jones>Uh-huh.

00:39:31.420 --> 00:39:32.220
<v Mark Morin>So –

00:39:32.220 --> 00:39:37.860
<v Dave Jones>Which is a very common package for RF amplifier type chips.

00:39:38.020 --> 00:39:41.900
<v Dave Jones>You know, if you open up anything, you know, old school RF, yeah, you'll find these packages.

00:39:42.080 --> 00:39:43.560
<v Mark Morin>Well, it seems like it used to be anyway.

00:39:44.060 --> 00:39:44.580
<v Dave Jones>Well, yeah.

00:39:44.800 --> 00:39:52.600
<v Mark Morin>You know, there's not a heck of a lot of variety on DigiKey nowadays to find, you know, some replacements that drop in.

00:39:52.600 --> 00:39:58.280
<v Mark Morin>So we were scouring the internet for a replacement for this thing.

00:39:58.320 --> 00:39:59.140
<v Mark Morin>We couldn't find anything.

00:39:59.140 --> 00:40:05.900
<v Mark Morin>We ended up finding one by a, you know, a fly-by-night obsolete transistor manufacturer.

00:40:07.280 --> 00:40:08.800
<v Mark Morin>Time to call the broker.

00:40:09.580 --> 00:40:09.900
<v Mark Morin>Sure.

00:40:10.840 --> 00:40:15.580
<v Mark Morin>We bought some from one of the big three distributors, you know, and tried it out.

00:40:15.700 --> 00:40:17.960
<v Chris Gammell>Did you buy it in a darkened alley or anything like that?

00:40:18.060 --> 00:40:18.760
<v Mark Morin>No, no.

00:40:18.880 --> 00:40:21.960
<v Mark Morin>You'd be surprised how large of a company was carrying these things.

00:40:22.160 --> 00:40:22.240
<v Mark Morin>Okay.

00:40:23.440 --> 00:40:27.740
<v Mark Morin>And that's kind of what led Credence to the company that was making them, right?

00:40:27.740 --> 00:40:29.420
<v Mark Morin>So we got them.

00:40:29.420 --> 00:40:35.880
<v Chris Gammell>Oh, so this is like a secondhand, like somebody in their garage using an old chip manufacturing equipment.

00:40:36.080 --> 00:40:43.660
<v Mark Morin>I think somebody bought the remaining guys from somebody that made these before, right?

00:40:43.780 --> 00:40:44.040
<v Mark Morin>Right.

00:40:44.040 --> 00:40:48.680
<v Mark Morin>And they just decided we'll crank out as many as we can before the whole thing falls apart.

00:40:49.500 --> 00:40:59.380
<v Chris Gammell>I've always said that my retirement plan is to become a chip broker and just find a part like this and then just stockpile them and just charge someone like you through the roof kind of thing.

00:40:59.680 --> 00:41:01.640
<v Mark Morin>Buy them at $1.20 and sell them for $10.

00:41:02.020 --> 00:41:02.880
<v Chris Gammell>Oh, more than that.

00:41:02.960 --> 00:41:03.280
<v Chris Gammell>Come on, man.

00:41:03.300 --> 00:41:03.600
<v Chris Gammell>$10?

00:41:03.840 --> 00:41:04.140
<v Chris Gammell>Yeah.

00:41:04.180 --> 00:41:04.780
<v Chris Gammell>Let's stop there.

00:41:04.780 --> 00:41:07.200
<v Mark Morin>Well, yeah, the gravy train never ends.

00:41:07.200 --> 00:41:07.580
<v Mark Morin>That's right.

00:41:07.620 --> 00:41:08.220
<v Mark Morin>Until it hurts.

00:41:08.920 --> 00:41:13.600
<v Mark Morin>So this thing basically passed all of our qualification tests.

00:41:13.740 --> 00:41:19.760
<v Mark Morin>We did dummy load testing and AOM insertion loss testing, built lasers, ran them for thousands of hours and burn in.

00:41:20.020 --> 00:41:23.240
<v Mark Morin>And then we order a reel from this company, like Factory Direct.

00:41:23.240 --> 00:41:23.860
<v Chris Gammell>Oh, no.

00:41:24.620 --> 00:41:25.880
<v Mark Morin>I know what comes next.

00:41:25.880 --> 00:41:28.980
<v Mark Morin>So we send those off to our CM, right?

00:41:29.400 --> 00:41:33.980
<v Mark Morin>And they load them up on a bunch of boards and we get the boards in and absolutely nothing works.

00:41:33.980 --> 00:41:34.440
<v Mark Morin>Nothing works at all.

00:41:34.580 --> 00:41:34.640
<v Mark Morin>Yep.

00:41:34.640 --> 00:41:37.420
<v Mark Morin>And you're like, what is going on here?

00:41:37.480 --> 00:41:38.560
<v Mark Morin>We just tested these.

00:41:38.660 --> 00:41:38.980
<v Mark Morin>No, no.

00:41:39.080 --> 00:41:40.480
<v Chris Gammell>You tested the good ones.

00:41:40.960 --> 00:41:41.160
<v Mark Morin>Right.

00:41:41.240 --> 00:41:41.600
<v Mark Morin>Exactly.

00:41:42.700 --> 00:41:46.000
<v Mark Morin>They apparently made like 25 good ones before they made this reel.

00:41:46.000 --> 00:41:52.140
<v Mark Morin>And so we took one out of the old package we had originally ordered, soldered onto a board, snaps right on, you know, turns on.

00:41:52.140 --> 00:41:57.040
<v Mark Morin>So we're all like, this is – if there's any kids out there listening, thinking.

00:41:57.600 --> 00:41:58.300
<v Chris Gammell>Gather around, children.

00:41:58.920 --> 00:42:09.540
<v Mark Morin>Electrical engineering is just the gravy train and it's really a collection of these stomach-sinking moments and then a few days of digging yourself out, you know?

00:42:10.480 --> 00:42:11.100
<v Mark Morin>Uh-huh.

00:42:11.260 --> 00:42:11.480
<v Mark Morin>Yes.

00:42:12.480 --> 00:42:17.240
<v Mark Morin>And so we start going back and forth with them, like what happened.

00:42:17.820 --> 00:42:19.960
<v Mark Morin>This is obviously different than the other ones we got.

00:42:19.960 --> 00:42:21.960
<v Mark Morin>And it took them a while to admit it.

00:42:22.060 --> 00:42:24.700
<v Mark Morin>But you could see that the package physically changed.

00:42:24.780 --> 00:42:28.640
<v Mark Morin>The old one had a big fat lead on one side to kind of mark pin one.

00:42:28.780 --> 00:42:31.740
<v Mark Morin>And the new one had like a skinny short lead to mark pin one.

00:42:32.640 --> 00:42:32.960
<v Mark Morin>Oh.

00:42:33.500 --> 00:42:42.080
<v Mark Morin>So they were like, oh, well, what happened is we bought the remaining dyes and packaging and then like there's no more of those anywhere and the tooling doesn't exist anymore.

00:42:42.080 --> 00:42:43.260
<v Mark Morin>So we couldn't make them anymore.

00:42:43.480 --> 00:42:47.340
<v Mark Morin>So we just started making it with, you know, a newer package.

00:42:47.340 --> 00:42:48.140
<v Mark Morin>Whenever we had LUT, right.

00:42:48.140 --> 00:42:48.500
<v Mark Morin>Right.

00:42:48.660 --> 00:42:51.940
<v Mark Morin>But it changes the, you know, input impedance of the transistor.

00:42:52.140 --> 00:42:54.640
<v Mark Morin>So the whole circuit is you'd have to adjust.

00:42:54.720 --> 00:42:57.040
<v Mark Morin>So he's like, oh, yeah, just change some caps and inductors.

00:42:57.100 --> 00:42:57.760
<v Mark Morin>I'm sure it'll work.

00:42:59.360 --> 00:43:01.720
<v Mark Morin>You know, blah, blah, blah, RF stuff.

00:43:02.340 --> 00:43:02.500
<v Mark Morin>Yeah.

00:43:02.520 --> 00:43:04.300
<v Mark Morin>This is their sales guy on the phone, you know?

00:43:04.480 --> 00:43:04.840
<v Mark Morin>Right.

00:43:05.180 --> 00:43:07.360
<v Chris Gammell>Well, that's a little better than if the engineer was saying that.

00:43:07.440 --> 00:43:08.720
<v Chris Gammell>I mean, that would be something else.

00:43:09.020 --> 00:43:08.980
<v Speaker ?>But.

00:43:09.220 --> 00:43:09.420
<v Mark Morin>Yeah.

00:43:09.480 --> 00:43:11.640
<v Mark Morin>I don't know if they had engineers to be honest with you.

00:43:11.740 --> 00:43:12.500
<v Mark Morin>Oh, jeez.

00:43:12.500 --> 00:43:13.740
<v Mark Morin>But it was a.

00:43:15.120 --> 00:43:15.320
<v Mark Morin>Yeah.

00:43:15.360 --> 00:43:19.940
<v Mark Morin>So we started over from scratch after a year of intermittent work on this.

00:43:20.460 --> 00:43:24.140
<v Mark Morin>So who ended up bearing the cost for that?

00:43:24.180 --> 00:43:25.800
<v Mark Morin>Oh, I'm pretty sure we ate it.

00:43:26.220 --> 00:43:26.600
<v Dave Jones>Right.

00:43:26.880 --> 00:43:27.380
<v Chris Gammell>You just ate it.

00:43:27.400 --> 00:43:28.200
<v Chris Gammell>What are you going to do, right?

00:43:28.220 --> 00:43:31.160
<v Chris Gammell>I mean, you're dealing with people that, you know.

00:43:31.240 --> 00:43:31.720
<v Chris Gammell>Don't care.

00:43:31.860 --> 00:43:32.440
<v Chris Gammell>Yeah, exactly.

00:43:33.180 --> 00:43:34.580
<v Mark Morin>They're like, yeah, we sold you the real.

00:43:35.200 --> 00:43:35.820
<v Mark Morin>See ya.

00:43:36.000 --> 00:43:36.360
<v Chris Gammell>You know.

00:43:36.540 --> 00:43:38.160
<v Chris Gammell>That money order doesn't come back, you know.

00:43:38.400 --> 00:43:38.700
<v Chris Gammell>Right.

00:43:38.700 --> 00:43:39.140
<v Chris Gammell>Exactly.

00:43:39.880 --> 00:43:44.260
<v Dave Jones>Because they weren't guaranteeing specs based on a data sheet, were they?

00:43:44.360 --> 00:43:44.740
<v Dave Jones>They were just.

00:43:45.340 --> 00:43:52.840
<v Mark Morin>Well, the kicker is they said, oh, if you look at the bottom of our data sheet, there's an asterisk that says all specs are subject to change.

00:43:53.180 --> 00:43:54.320
<v Dave Jones>Change, yep, yep.

00:43:54.500 --> 00:43:58.460
<v Mark Morin>And, you know, it's a lesson learned.

00:43:58.620 --> 00:44:02.480
<v Mark Morin>You can't trust anything that's even written down on paper.

00:44:02.800 --> 00:44:06.420
<v Mark Morin>The other thing is their data sheet didn't have the S parameters in it ever, right?

00:44:06.420 --> 00:44:09.540
<v Mark Morin>So they're like, oh, yeah, it's an unspecked feature.

00:44:09.680 --> 00:44:11.920
<v Mark Morin>That's the most important part of an RF transistor.

00:44:13.480 --> 00:44:14.120
<v Dave Jones>That's funny.

00:44:14.220 --> 00:44:20.380
<v Dave Jones>Can you tell us about the S parameters for those out there who aren't conversing with such things?

00:44:20.620 --> 00:44:21.060
<v Dave Jones>Right.

00:44:21.160 --> 00:44:21.440
<v Dave Jones>In general?

00:44:21.440 --> 00:44:23.560
<v Mark Morin>So there's an input.

00:44:24.380 --> 00:44:27.200
<v Dave Jones>Generic, because you can do an entire course on S parameters.

00:44:27.200 --> 00:44:37.660
<v Mark Morin>There's basically an input impedance and then a reflection coefficient and then an output impedance and then like a reflected power coefficient.

00:44:38.140 --> 00:44:38.240
<v Mark Morin>Right.

00:44:38.320 --> 00:44:43.560
<v Mark Morin>So there's four S parameters, S1, 1, S1, 2, S2, 1, and S2, 2.

00:44:43.560 --> 00:44:45.700
<v Dave Jones>For any particular device or server.

00:44:45.700 --> 00:44:45.900
<v Dave Jones>Right.

00:44:46.100 --> 00:44:53.840
<v Mark Morin>So you'll see this funny looking navigational map in the back of an RF transistor data sheet with a squiggly line drawn on it by some guy.

00:44:54.040 --> 00:44:55.420
<v Mark Morin>And then he scanned it, right?

00:44:55.700 --> 00:44:56.700
<v Mark Morin>And that's your...

00:44:56.700 --> 00:44:58.700
<v Mark Morin>That's your...

00:44:58.700 --> 00:44:59.340
<v Mark Morin>That's data right there.

00:44:59.440 --> 00:45:00.340
<v Mark Morin>Yes, that's data.

00:45:00.480 --> 00:45:01.960
<v Mark Morin>This is a data sheet, obviously.

00:45:02.420 --> 00:45:03.140
<v Mark Morin>So there's the data.

00:45:04.020 --> 00:45:04.460
<v Mark Morin>Exactly.

00:45:04.460 --> 00:45:04.540
<v Mark Morin>Exactly.

00:45:04.960 --> 00:45:07.520
<v Mark Morin>So they're kind of telling you on that little...

00:45:07.520 --> 00:45:11.440
<v Mark Morin>That math how to match the transistor to the input and output, sir.

00:45:12.260 --> 00:45:12.640
<v Dave Jones>Got it.

00:45:12.840 --> 00:45:14.200
<v Mark Morin>This is a short version, right?

00:45:14.660 --> 00:45:14.860
<v Mark Morin>Yep.

00:45:15.120 --> 00:45:15.400
<v Mark Morin>Wow.

00:45:15.420 --> 00:45:15.860
<v Mark Morin>That's all we need.

00:45:16.280 --> 00:45:17.080
<v Chris Gammell>So the...

00:45:17.080 --> 00:45:17.820
<v Chris Gammell>So what happened?

00:45:17.920 --> 00:45:18.320
<v Chris Gammell>So then...

00:45:18.320 --> 00:45:21.660
<v Chris Gammell>Okay, so you're year in, and I think that if...

00:45:21.660 --> 00:45:25.280
<v Chris Gammell>I'm guessing you guys did great on the procuring enough of the existing ones.

00:45:25.360 --> 00:45:26.720
<v Chris Gammell>That's what happens with last time buys.

00:45:26.840 --> 00:45:27.980
<v Mark Morin>So you were probably okay for a while.

00:45:28.520 --> 00:45:31.620
<v Mark Morin>At this point, we called and begged for a second last time buy.

00:45:32.660 --> 00:45:34.340
<v Dave Jones>That never works.

00:45:34.460 --> 00:45:36.480
<v Mark Morin>No, it totally worked, Chris.

00:45:36.480 --> 00:45:36.740
<v Mark Morin>It did?

00:45:36.740 --> 00:45:37.200
<v Mark Morin>You'd be surprised.

00:45:37.320 --> 00:45:37.880
<v Mark Morin>We got some.

00:45:37.900 --> 00:45:38.040
<v Mark Morin>Wow.

00:45:38.240 --> 00:45:39.000
<v Mark Morin>Not a full reel.

00:45:39.000 --> 00:45:39.640
<v Mark Morin>We got a partial.

00:45:39.640 --> 00:45:40.140
<v Mark Morin>Right, okay.

00:45:40.240 --> 00:45:40.380
<v Mark Morin>Yeah.

00:45:40.720 --> 00:45:46.140
<v Mark Morin>And then we went to a hole-in-the-wall Southeast Asian distributor that claimed they had some,

00:45:46.620 --> 00:45:48.540
<v Mark Morin>and we bought a big reel off of them.

00:45:48.720 --> 00:45:48.940
<v Chris Gammell>Yep.

00:45:49.480 --> 00:45:52.000
<v Mark Morin>And then we were testing every piece.

00:45:52.060 --> 00:45:56.500
<v Mark Morin>Well, we threw some on boards to see if they worked, and it was about a one in ten shot.

00:45:56.920 --> 00:45:57.780
<v Dave Jones>And we started...

00:45:57.780 --> 00:45:58.240
<v Dave Jones>Oh, no.

00:45:58.400 --> 00:45:58.780
<v Mark Morin>Wow.

00:45:58.780 --> 00:46:00.060
<v Dave Jones>We started testing...

00:46:00.060 --> 00:46:03.200
<v Dave Jones>You didn't selectively test them, did you?

00:46:03.320 --> 00:46:04.300
<v Dave Jones>You were that desperate.

00:46:04.460 --> 00:46:05.760
<v Mark Morin>We started testing.

00:46:05.940 --> 00:46:09.460
<v Mark Morin>We tested the first hundred off the reel in the lab just to see what the results would

00:46:09.460 --> 00:46:10.520
<v Mark Morin>be, and it was like one out of ten.

00:46:11.020 --> 00:46:13.000
<v Mark Morin>And we decided to just throw the whole thing in the trash.

00:46:13.440 --> 00:46:13.660
<v Mark Morin>Wow.

00:46:13.980 --> 00:46:18.620
<v Mark Morin>And then there was a huge stock of non-roast compliant parts out in the world, right?

00:46:18.940 --> 00:46:19.200
<v Mark Morin>Mm-hmm.

00:46:19.400 --> 00:46:20.160
<v Dave Jones>Oh, yeah.

00:46:20.160 --> 00:46:23.320
<v Dave Jones>Yeah, it's tempting just to go, look, just nobody mention.

00:46:24.320 --> 00:46:25.160
<v Dave Jones>Just use them.

00:46:25.160 --> 00:46:25.840
<v Dave Jones>Just use them.

00:46:26.540 --> 00:46:28.260
<v Mark Morin>You know, we didn't even talk about that.

00:46:28.340 --> 00:46:30.320
<v Mark Morin>There's de-letting services, you know?

00:46:30.460 --> 00:46:31.160
<v Mark Morin>And we were thinking about...

00:46:31.160 --> 00:46:31.540
<v Mark Morin>Oh, okay.

00:46:31.540 --> 00:46:31.840
<v Mark Morin>No.

00:46:32.080 --> 00:46:35.860
<v Mark Morin>Buying leaded parts and sending them off to a de-letting service, but it just turned into

00:46:35.860 --> 00:46:36.540
<v Mark Morin>like, how do you guarantee...

00:46:37.500 --> 00:46:39.540
<v Mark Morin>You know, we're putting roast compliant on our data sheets, so we can't...

00:46:40.260 --> 00:46:40.620
<v Mark Morin>Right.

00:46:41.020 --> 00:46:42.040
<v Mark Morin>...can't even mess with it.

00:46:42.680 --> 00:46:43.040
<v Dave Jones>Yeah.

00:46:43.440 --> 00:46:46.480
<v Mark Morin>So we ended up just probably doing what we should have done in the first place, going

00:46:46.480 --> 00:46:48.480
<v Mark Morin>to a brand new transistor...

00:46:48.480 --> 00:46:49.540
<v Mark Morin>Yeah.

00:46:49.580 --> 00:46:53.840
<v Mark Morin>...working out the whole thing again, and then at the end, the new transistor is a higher

00:46:53.840 --> 00:46:58.660
<v Mark Morin>bandwidth than the old one, so it amplifies all this junk on our clock.

00:46:58.660 --> 00:46:59.000
<v Dave Jones>Which can be a problem.

00:46:59.160 --> 00:46:59.660
<v Dave Jones>Oh, yeah.

00:46:59.900 --> 00:47:00.300
<v Dave Jones>Oh, yeah.

00:47:00.820 --> 00:47:04.100
<v Mark Morin>So you end up getting spikes...

00:47:04.100 --> 00:47:10.740
<v Dave Jones>All of that crap on your power rail that your old transistor was too slow to, you know,

00:47:10.920 --> 00:47:11.100
<v Dave Jones>to amplify...

00:47:11.100 --> 00:47:11.760
<v Dave Jones>Oh, it was beautiful.

00:47:12.080 --> 00:47:12.700
<v Dave Jones>Natural filtering.

00:47:12.700 --> 00:47:13.140
<v Dave Jones>Yeah.

00:47:13.380 --> 00:47:14.640
<v Mark Morin>It's all coming through, right?

00:47:14.640 --> 00:47:20.180
<v Mark Morin>The old one had a roll-off frequency of 175 megahertz, and we're using 150, so it works

00:47:20.180 --> 00:47:25.280
<v Mark Morin>out perfect, and the new one was, you know, 0 to 500 megahertz, so it amplified all the

00:47:25.280 --> 00:47:27.100
<v Mark Morin>sideband garbage.

00:47:27.260 --> 00:47:27.900
<v Mark Morin>Oh, man.

00:47:28.160 --> 00:47:28.560
<v Mark Morin>Yay!

00:47:28.560 --> 00:47:33.960
<v Mark Morin>That makes the resultant laser pulse coming out of the AOM have little spikes in it, so...

00:47:33.960 --> 00:47:36.800
<v Chris Gammell>So what, you had to put extra filtering in then just to make sure you cleaned everything

00:47:36.800 --> 00:47:37.400
<v Chris Gammell>up and stuff?

00:47:37.460 --> 00:47:42.020
<v Mark Morin>We ended up changing the input clock to a pure sine wave crystal oscillator.

00:47:42.020 --> 00:47:42.460
<v Mark Morin>Right.

00:47:42.460 --> 00:47:43.680
<v Mark Morin>And that cleaned it up.

00:47:44.320 --> 00:47:44.480
<v Mark Morin>Right.

00:47:44.480 --> 00:47:45.220
<v Chris Gammell>Man, that's crazy, though.

00:47:45.340 --> 00:47:47.180
<v Chris Gammell>Like, that is...

00:47:47.180 --> 00:47:52.840
<v Chris Gammell>I did very similar work in past jobs as well, and sometimes you're just like, yeah, why

00:47:52.840 --> 00:47:54.280
<v Chris Gammell>didn't we just start here, you know?

00:47:54.500 --> 00:47:54.720
<v Chris Gammell>Yeah.

00:47:54.720 --> 00:47:54.800
<v Chris Gammell>Yeah.

00:47:55.100 --> 00:47:57.420
<v Mark Morin>Well, because you didn't want to do any of the work in the beginning, right?

00:47:57.420 --> 00:47:58.120
<v Mark Morin>No, exactly.

00:47:58.320 --> 00:47:59.880
<v Dave Jones>You wanted to see if you could get away with it.

00:48:00.040 --> 00:48:00.260
<v Dave Jones>Right.

00:48:00.300 --> 00:48:04.520
<v Mark Morin>We have real products we want to develop and not stuff that's already basically done if

00:48:04.520 --> 00:48:05.760
<v Mark Morin>we could just find more transistors.

00:48:06.120 --> 00:48:08.800
<v Mark Morin>So, you know, there's no functional reason to get rid of that thing.

00:48:08.820 --> 00:48:09.300
<v Mark Morin>It was fine.

00:48:09.380 --> 00:48:10.080
<v Mark Morin>It always worked.

00:48:10.080 --> 00:48:14.960
<v Mark Morin>So, you know, it was just we couldn't get them anymore was the only reason we wanted

00:48:14.960 --> 00:48:15.840
<v Mark Morin>to change it at all.

00:48:16.720 --> 00:48:18.180
<v Chris Gammell>Also kind of calls out just like how...

00:48:18.180 --> 00:48:19.300
<v Chris Gammell>I mean, this is not...

00:48:19.300 --> 00:48:20.800
<v Chris Gammell>I don't think it's unique to you guys either.

00:48:20.920 --> 00:48:24.340
<v Chris Gammell>It's just like how dependent we are on...

00:48:24.340 --> 00:48:25.440
<v Chris Gammell>This isn't even single source.

00:48:25.540 --> 00:48:30.540
<v Chris Gammell>I mean, it is single source, but, you know, just dependent on the specs of certain types

00:48:30.540 --> 00:48:30.960
<v Chris Gammell>of parts.

00:48:30.960 --> 00:48:32.020
<v Chris Gammell>You know, like it's just...

00:48:32.020 --> 00:48:36.140
<v Chris Gammell>They're like these linchpin specs effectively that, you know, we just...

00:48:36.140 --> 00:48:38.860
<v Chris Gammell>Our products are based on them and it's scary.

00:48:38.980 --> 00:48:43.900
<v Chris Gammell>It's almost like you have to do like a risk audit around each product and be like, that's

00:48:43.900 --> 00:48:45.040
<v Chris Gammell>the part right there.

00:48:45.140 --> 00:48:47.020
<v Chris Gammell>That's the one that will be screwed from.

00:48:47.560 --> 00:48:49.440
<v Mark Morin>You know, yeah, you could.

00:48:50.000 --> 00:48:50.880
<v Mark Morin>You know, you get...

00:48:50.880 --> 00:48:52.660
<v Mark Morin>You'll never sleep at night, but yeah.

00:48:52.820 --> 00:48:53.000
<v Mark Morin>Right.

00:48:53.700 --> 00:48:56.220
<v Mark Morin>Well, you need a huge staff just to do that.

00:48:56.400 --> 00:48:56.820
<v Mark Morin>That's true.

00:48:56.940 --> 00:48:57.080
<v Chris Gammell>Yeah.

00:48:57.540 --> 00:48:58.000
<v Mark Morin>The other...

00:48:58.000 --> 00:49:00.940
<v Mark Morin>You know, if you have 1,400 parts on a board, which one are you looking at?

00:49:00.960 --> 00:49:05.840
<v Mark Morin>That they could just change the spec on you and decide that you're done making lasers

00:49:05.840 --> 00:49:06.680
<v Mark Morin>for a while, you know?

00:49:07.140 --> 00:49:07.440
<v Mark Morin>Yeah.

00:49:07.640 --> 00:49:12.640
<v Dave Jones>And we've joked about this on previous episodes, Chris, but the, you know, sometimes you'll

00:49:12.640 --> 00:49:13.060
<v Dave Jones>get...

00:49:13.060 --> 00:49:16.780
<v Dave Jones>In a company, you'll get promoted to component obsolescence engineer.

00:49:17.460 --> 00:49:17.620
<v Dave Jones>You know?

00:49:18.100 --> 00:49:19.180
<v Dave Jones>But it's...

00:49:19.180 --> 00:49:22.200
<v Dave Jones>At some big companies, that's a real job.

00:49:22.440 --> 00:49:22.600
<v Dave Jones>Yeah.

00:49:22.680 --> 00:49:22.900
<v Dave Jones>You know?

00:49:22.940 --> 00:49:26.760
<v Dave Jones>Because as you said, like there's hundreds and hundreds of parts and, you know, and with

00:49:26.760 --> 00:49:28.120
<v Dave Jones>critical specs or whatever.

00:49:28.120 --> 00:49:32.120
<v Dave Jones>And, you know, one of them goes belly up, then...

00:49:32.800 --> 00:49:35.560
<v Chris Gammell>At the end of the day, a manufacturing company makes their money from making stuff.

00:49:35.640 --> 00:49:36.800
<v Chris Gammell>And if you can't make stuff, you're screwed.

00:49:37.100 --> 00:49:37.660
<v Chris Gammell>So, yeah.

00:49:37.960 --> 00:49:39.620
<v Mark Morin>That's the bottom line.

00:49:39.880 --> 00:49:40.080
<v Mark Morin>Yeah.

00:49:40.720 --> 00:49:41.120
<v Mark Morin>But it's just...

00:49:41.680 --> 00:49:43.580
<v Mark Morin>It's like that project is funny.

00:49:44.100 --> 00:49:46.800
<v Mark Morin>How many times you go to the...

00:49:46.800 --> 00:49:52.000
<v Mark Morin>You're at the top of the mountain and you crash back down and then you climb it up again.

00:49:52.220 --> 00:49:52.260
<v Mark Morin>Oh, yeah.

00:49:52.260 --> 00:49:57.620
<v Mark Morin>And then you crash and it's just like two years of basically, you know, intermittent work because

00:49:57.620 --> 00:50:00.820
<v Mark Morin>you send a board out to spin and it takes a while to come back and all that.

00:50:00.820 --> 00:50:05.840
<v Mark Morin>But, you know, when you get back on it, you're like, oh, yeah, we're totally, you know, totally

00:50:05.840 --> 00:50:06.760
<v Mark Morin>smoked again.

00:50:07.540 --> 00:50:11.200
<v Mark Morin>Just, you know, it was deja vu all over again like four times.

00:50:11.280 --> 00:50:11.880
<v Mark Morin>It was pretty funny.

00:50:12.200 --> 00:50:12.340
<v Chris Gammell>Yeah.

00:50:12.340 --> 00:50:15.160
<v Chris Gammell>So, you mentioned 1,400 components on a board.

00:50:15.340 --> 00:50:16.720
<v Chris Gammell>Like, what are some other common...

00:50:16.720 --> 00:50:22.640
<v Chris Gammell>So, if someone like Dave cracks open a device that has a laser in it and stuff like that,

00:50:22.760 --> 00:50:25.000
<v Chris Gammell>what are some common circuits that people would see in there?

00:50:25.080 --> 00:50:29.260
<v Chris Gammell>So, you were talking here about the diode and the drivers and stuff like that.

00:50:29.560 --> 00:50:30.300
<v Chris Gammell>What else is in there?

00:50:30.760 --> 00:50:31.560
<v Mark Morin>Oh, you know what?

00:50:32.740 --> 00:50:34.140
<v Mark Morin>There's kind of a...

00:50:34.140 --> 00:50:40.620
<v Mark Morin>There's a Bob Pease book that I think most of the laser industry used to design most of

00:50:40.620 --> 00:50:41.000
<v Mark Morin>the lasers.

00:50:41.000 --> 00:50:42.720
<v Mark Morin>I could link it on your subreddit.

00:50:43.460 --> 00:50:43.540
<v Mark Morin>Sure.

00:50:43.640 --> 00:50:44.080
<v Mark Morin>Yes, please.

00:50:44.240 --> 00:50:44.340
<v Mark Morin>Yeah.

00:50:44.420 --> 00:50:45.380
<v Mark Morin>It's basically...

00:50:45.380 --> 00:50:49.880
<v Mark Morin>There's a, you know, a photodiode transimpedance amplifier.

00:50:50.440 --> 00:50:50.660
<v Chris Gammell>Okay.

00:50:50.800 --> 00:50:51.160
<v Mark Morin>Yeah, yeah.

00:50:51.220 --> 00:50:59.460
<v Mark Morin>And then there's a current source, right, to drive the laser diode, which would have an

00:50:59.460 --> 00:51:01.540
<v Mark Morin>op amp as a control system.

00:51:02.340 --> 00:51:06.080
<v Mark Morin>Maybe not in our particular systems, but I think most lasers you'd open up that you bought

00:51:06.080 --> 00:51:08.120
<v Mark Morin>off of eBay would have that.

00:51:08.120 --> 00:51:08.700
<v Mark Morin>Mm-hmm.

00:51:11.080 --> 00:51:16.600
<v Mark Morin>There'd certainly be some kind of micro or FPGA in there kind of handling everything.

00:51:16.740 --> 00:51:17.000
<v Chris Gammell>Yeah.

00:51:17.360 --> 00:51:21.640
<v Chris Gammell>And then, like, is it like an ADC as well?

00:51:21.720 --> 00:51:22.840
<v Chris Gammell>I mean, just a...

00:51:22.840 --> 00:51:25.760
<v Mark Morin>Yeah, well, depending if you got a...

00:51:25.760 --> 00:51:30.180
<v Mark Morin>If you have a built-in ADC and DAC in the micro, I guess you could get away without it.

00:51:30.300 --> 00:51:30.760
<v Chris Gammell>Oh, I see.

00:51:30.820 --> 00:51:31.020
<v Chris Gammell>I see.

00:51:31.120 --> 00:51:31.320
<v Chris Gammell>Okay.

00:51:31.520 --> 00:51:31.760
<v Chris Gammell>Yeah.

00:51:32.720 --> 00:51:36.560
<v Mark Morin>And then, you know, you'd probably have some TTL connector on the front that would control

00:51:36.560 --> 00:51:37.000
<v Mark Morin>everything.

00:51:37.200 --> 00:51:39.640
<v Chris Gammell>So this is on the receiver side, though?

00:51:39.660 --> 00:51:40.480
<v Chris Gammell>That's what we're talking about here?

00:51:40.600 --> 00:51:43.080
<v Chris Gammell>Is, like, transimpedance amp to actually detect and...

00:51:43.080 --> 00:51:43.660
<v Mark Morin>No, no, no.

00:51:43.680 --> 00:51:44.700
<v Mark Morin>That's in your laser, right?

00:51:44.740 --> 00:51:51.760
<v Mark Morin>You have gain stages, and if one shuts off, you know, your electronics short out and the...

00:51:52.340 --> 00:51:54.960
<v Mark Morin>Well, even, like, the customer signal goes away, right?

00:51:55.460 --> 00:52:00.200
<v Mark Morin>To amplify, you have to shut all the laser diodes off before the laser kills itself.

00:52:00.200 --> 00:52:05.440
<v Mark Morin>So there'd be transimpedance amplifiers monitoring photodiodes at every gain stage to kind of

00:52:05.440 --> 00:52:11.660
<v Mark Morin>make sure that there's a seed signal coming in before you pump watts and watts in, you

00:52:11.660 --> 00:52:12.560
<v Mark Morin>know, over...

00:52:12.560 --> 00:52:16.400
<v Mark Morin>You know, this stuff all happens in hundreds of microseconds timescale.

00:52:16.520 --> 00:52:21.420
<v Mark Morin>So if you're pumping a couple watts for a couple seconds, it's a game over if there's

00:52:21.420 --> 00:52:22.400
<v Mark Morin>no input signal.

00:52:22.460 --> 00:52:22.580
<v Mark Morin>Yeah.

00:52:23.400 --> 00:52:27.600
<v Chris Gammell>Because it'll just rail, and then that'll just pump all that junk into the lines and stuff

00:52:27.600 --> 00:52:27.880
<v Chris Gammell>like that.

00:52:27.880 --> 00:52:27.920
<v Chris Gammell>Yeah.

00:52:27.920 --> 00:52:30.440
<v Mark Morin>And that energy has to go some way.

00:52:30.800 --> 00:52:31.020
<v Mark Morin>Right.

00:52:31.100 --> 00:52:35.340
<v Mark Morin>That ASE term where it, like, automatic stimulated emission, it just kind of happens.

00:52:35.720 --> 00:52:38.180
<v Mark Morin>And then once it happens...

00:52:38.180 --> 00:52:38.720
<v Mark Morin>Overstimulation.

00:52:39.580 --> 00:52:45.860
<v Mark Morin>You start bumping those electrons off with random wavelengths in random directions, and

00:52:45.860 --> 00:52:48.020
<v Mark Morin>then boom, it's all gone.

00:52:48.160 --> 00:52:48.640
<v Mark Morin>It's over.

00:52:48.940 --> 00:52:50.660
<v Chris Gammell>Especially, yeah.

00:52:50.920 --> 00:52:52.240
<v Chris Gammell>And what happens if we...

00:52:52.240 --> 00:52:54.500
<v Chris Gammell>So if we did that, what would it look like?

00:52:54.500 --> 00:52:56.720
<v Chris Gammell>I mean, does it actually go up in smoke or what?

00:52:57.520 --> 00:53:00.200
<v Mark Morin>I bet if you go on YouTube and...

00:53:00.200 --> 00:53:01.420
<v Mark Morin>I will be doing this.

00:53:01.760 --> 00:53:08.720
<v Mark Morin>And we look up self-laced fiber or, like, plasma ball, you'll see a bunch of videos where there's,

00:53:08.840 --> 00:53:14.260
<v Mark Morin>like, a blue plasma ball traveling down the center of a fiber in, like, a coil, right?

00:53:14.260 --> 00:53:17.140
<v Mark Morin>So it just, like, kind of looks like it's going around a racetrack like a sparkler.

00:53:17.760 --> 00:53:18.520
<v Mark Morin>And it just...

00:53:18.520 --> 00:53:19.440
<v Mark Morin>It's like...

00:53:19.440 --> 00:53:19.740
<v Mark Morin>Cool.

00:53:20.000 --> 00:53:25.100
<v Mark Morin>It sounds like a snake hissing, and you have the evolutionary reaction of that and, like,

00:53:25.100 --> 00:53:27.020
<v Mark Morin>jump out of your shoes, man.

00:53:27.360 --> 00:53:28.720
<v Mark Morin>It's scary when it happens.

00:53:28.940 --> 00:53:29.140
<v Mark Morin>Right.

00:53:29.140 --> 00:53:33.020
<v Mark Morin>But luckily, we don't want to get that often.

00:53:33.160 --> 00:53:33.800
<v Mark Morin>That's a rarity.

00:53:34.900 --> 00:53:38.400
<v Chris Gammell>So do you get spec then on, like, how fast you have to shut stuff down, or is it just

00:53:38.400 --> 00:53:39.820
<v Chris Gammell>kind of, like, just as fast as possible?

00:53:39.960 --> 00:53:40.300
<v Chris Gammell>I mean, is it...

00:53:40.300 --> 00:53:40.420
<v Chris Gammell>Oh, yeah.

00:53:40.480 --> 00:53:41.860
<v Mark Morin>That's a thing.

00:53:42.160 --> 00:53:43.980
<v Chris Gammell>That's, like, something you would sell to your customers.

00:53:44.080 --> 00:53:46.200
<v Chris Gammell>You'd say, we shut down and blah, blah, blah, blah, blah.

00:53:46.300 --> 00:53:52.960
<v Mark Morin>Well, that's more like a safety feature inside the laser that would manifest itself as, like,

00:53:52.980 --> 00:53:54.620
<v Mark Morin>a downtime for the customer, right?

00:53:54.620 --> 00:53:58.520
<v Mark Morin>So you'd just be saying, like, hey, if something happens, the laser saves itself, and then,

00:53:58.880 --> 00:54:03.540
<v Mark Morin>you know, you cycle power, maybe it recovers on its own, and then the world is right again.

00:54:03.620 --> 00:54:04.620
<v Mark Morin>You know, nothing...

00:54:05.360 --> 00:54:07.980
<v Mark Morin>You really want the customer to never notice any of this.

00:54:08.040 --> 00:54:08.780
<v Mark Morin>It all just happens.

00:54:09.200 --> 00:54:09.560
<v Mark Morin>Yeah, right.

00:54:09.560 --> 00:54:10.200
<v Mark Morin>You know, and...

00:54:10.200 --> 00:54:12.320
<v Chris Gammell>What you could do is just instead, you could have...

00:54:12.320 --> 00:54:15.980
<v Chris Gammell>You could go cheap on the components and then put, like, a printer on the back, and

00:54:15.980 --> 00:54:19.600
<v Chris Gammell>every time it blows itself up, it prints a coupon for half off the next one, you know?

00:54:19.740 --> 00:54:20.080
<v Chris Gammell>Sure.

00:54:20.300 --> 00:54:20.480
<v Chris Gammell>Yeah.

00:54:20.740 --> 00:54:22.380
<v Chris Gammell>That's something.

00:54:22.380 --> 00:54:22.820
<v Chris Gammell>Yeah.

00:54:22.820 --> 00:54:25.200
<v Chris Gammell>Yeah, that's marketing genius right there.

00:54:25.320 --> 00:54:26.020
<v Chris Gammell>Yeah, that's good.

00:54:27.560 --> 00:54:30.580
<v Chris Gammell>So you mentioned multiple diodes as well.

00:54:30.700 --> 00:54:33.840
<v Chris Gammell>So are those photo diodes you're saying, or are there actual multiple laser diodes?

00:54:34.660 --> 00:54:35.980
<v Mark Morin>There's both.

00:54:36.980 --> 00:54:41.800
<v Mark Morin>For every gain stage in a fiber amplifier, you'd have pump diodes to...

00:54:41.800 --> 00:54:42.440
<v Chris Gammell>And what are those?

00:54:42.440 --> 00:54:47.440
<v Mark Morin>It's a laser diode, and it's usually at a wavelength that is...

00:54:47.440 --> 00:54:55.160
<v Mark Morin>That the rare earth element in the fiber will absorb efficiently, and not necessarily be the

00:54:55.160 --> 00:55:00.580
<v Mark Morin>wavelength that would transmit down the fiber as data or material processing light, right?

00:55:00.640 --> 00:55:03.760
<v Mark Morin>So this is off-band, I guess you'd call it.

00:55:04.480 --> 00:55:07.200
<v Chris Gammell>And that's just to juice up the energy in the line?

00:55:07.240 --> 00:55:08.200
<v Chris Gammell>Is that kind of the idea, or what?

00:55:08.200 --> 00:55:12.800
<v Mark Morin>Yeah, well, it's providing all of your amplification energy for the laser.

00:55:13.280 --> 00:55:14.400
<v Dave Jones>That is so crazy.

00:55:15.160 --> 00:55:16.100
<v Mark Morin>It's pretty crazy.

00:55:16.360 --> 00:55:16.600
<v Dave Jones>Yeah.

00:55:18.160 --> 00:55:21.900
<v Chris Gammell>And so how do you actually sum all of these together then?

00:55:22.820 --> 00:55:30.740
<v Mark Morin>That's the very highly profitable, patentable, optical component that everybody wants to be able to build, right?

00:55:30.740 --> 00:55:35.360
<v Mark Morin>This, whatever you call it, the combiner, I guess you'd say.

00:55:35.520 --> 00:55:36.400
<v Chris Gammell>Are there any...

00:55:36.400 --> 00:55:37.260
<v Chris Gammell>I mean, patents are public.

00:55:37.340 --> 00:55:41.540
<v Chris Gammell>Are there any public patents we could go look at to figure it out, or no?

00:55:42.660 --> 00:55:42.980
<v Mark Morin>Probably.

00:55:43.640 --> 00:55:44.760
<v Mark Morin>You're not going to tell them to us.

00:55:46.060 --> 00:55:51.660
<v Mark Morin>I've either worked for the company that did it, or we have an NRE with a company that's doing it now, too.

00:55:52.700 --> 00:55:53.480
<v Mark Morin>So I don't want to...

00:55:53.480 --> 00:55:54.600
<v Chris Gammell>Okay, no, that's no problem.

00:55:54.720 --> 00:55:55.940
<v Mark Morin>Spill too many beans, but...

00:55:55.940 --> 00:56:01.960
<v Chris Gammell>Well, just to give us an idea, though, this is like a separate element outside of the actual circuit board.

00:56:02.000 --> 00:56:03.140
<v Chris Gammell>Is that the idea, or...?

00:56:03.140 --> 00:56:03.520
<v Mark Morin>Oh, yeah.

00:56:03.720 --> 00:56:09.360
<v Mark Morin>So the laser diodes kind of are soldered to the circuit board or wired to the circuit board, depending on the system.

00:56:09.620 --> 00:56:10.960
<v Mark Morin>You pump the current through those.

00:56:11.060 --> 00:56:13.880
<v Mark Morin>There's a fiber coming out of the laser diode, right?

00:56:13.880 --> 00:56:21.060
<v Mark Morin>There's an optical component inside the laser diode that launches the light out of the die into the fiber, right?

00:56:21.280 --> 00:56:21.540
<v Chris Gammell>Sure.

00:56:21.660 --> 00:56:25.620
<v Mark Morin>And then that fiber splices onto this combiner component.

00:56:25.880 --> 00:56:26.340
<v Mark Morin>And that...

00:56:26.340 --> 00:56:32.200
<v Mark Morin>There's, you know, a bunch of fibers hanging out of one side and one fiber coming out of the other side, right?

00:56:32.420 --> 00:56:32.740
<v Mark Morin>Oh.

00:56:32.740 --> 00:56:37.840
<v Mark Morin>So you have the one single-mode fiber on either side for your signal, right?

00:56:37.860 --> 00:56:39.580
<v Mark Morin>That's the central fiber you're going down.

00:56:39.660 --> 00:56:45.840
<v Mark Morin>And then you have all these multi-mode fibers, which is like a larger core, so it's easier to launch the light into.

00:56:46.740 --> 00:56:52.380
<v Mark Morin>And you would splice your laser diodes onto the multi-mode fibers, and then somewhere in the combiner, all the magic happens,

00:56:52.380 --> 00:57:03.740
<v Mark Morin>where it takes the core light of the multi-mode fibers and puts it into the cladding of the single-mode fiber so that it can then reflect down to the core where the rare earth element is to get...

00:57:03.740 --> 00:57:03.880
<v Mark Morin>Wow.

00:57:03.980 --> 00:57:05.660
<v Mark Morin>...to turn into amplifying energy, right?

00:57:05.840 --> 00:57:06.100
<v Chris Gammell>Yeah.

00:57:06.260 --> 00:57:07.420
<v Chris Gammell>That is so cool, though.

00:57:07.520 --> 00:57:08.060
<v Chris Gammell>Like...

00:57:08.060 --> 00:57:09.220
<v Mark Morin>It's pretty cool.

00:57:09.400 --> 00:57:09.780
<v Mark Morin>Yeah.

00:57:10.120 --> 00:57:11.140
<v Mark Morin>Man, that's...

00:57:11.140 --> 00:57:15.560
<v Dave Jones>Can you explain the difference between multi-mode and single-mode for those playing along at home?

00:57:15.760 --> 00:57:18.240
<v Mark Morin>Well, it depends on the wavelength.

00:57:18.240 --> 00:57:23.640
<v Mark Morin>There's a number of modes in a fiber.

00:57:25.200 --> 00:57:29.240
<v Mark Morin>Like, the wavelength is actually the, like, spatial...

00:57:30.660 --> 00:57:40.120
<v Mark Morin>The core size of the fiber can only hold a certain amount of a wave, say.

00:57:40.940 --> 00:57:47.740
<v Mark Morin>And if your wavelength is a lot shorter than the core of the fiber, then you can have more than one wave in there, right?

00:57:47.740 --> 00:57:57.080
<v Mark Morin>So if you're multi-moded, it means that if you took this fiber, like, with a red, like, pen laser going down it, right?

00:57:57.440 --> 00:57:57.640
<v Mark Morin>Mm-hmm.

00:57:57.640 --> 00:58:04.260
<v Mark Morin>If you had a multi-mode fiber and you shot a red pen laser down it and then you look at it, the output of the fiber on a piece of paper, right?

00:58:04.300 --> 00:58:08.060
<v Mark Morin>So you can imagine there's, like, a divergent cone of light coming out of the core of the fiber.

00:58:08.060 --> 00:58:14.260
<v Mark Morin>You would see, like, five spots on the paper because the fiber core is too big for that wavelength.

00:58:14.980 --> 00:58:20.060
<v Mark Morin>So that's what they call multi-mode fiber, right?

00:58:20.060 --> 00:58:28.940
<v Mark Morin>So I guess the larger core diameter fibers are just called multi-mode because they're so big they will have multi-modes in most wavelengths.

00:58:29.280 --> 00:58:38.820
<v Mark Morin>And then the smaller ones, you're technically single-moded or maybe just not single-moded depending on the actual wavelength of the laser you're launching into it.

00:58:38.820 --> 00:58:50.240
<v Dave Jones>And from memory, because this was in a galaxy far, far away from me, single-mode fiber had lower loss versus distance.

00:58:50.560 --> 00:58:50.800
<v Dave Jones>Yes.

00:58:51.580 --> 00:58:52.020
<v Dave Jones>Generally.

00:58:52.740 --> 00:58:53.100
<v Dave Jones>Generally.

00:58:53.380 --> 00:58:56.560
<v Mark Morin>Because you're not interfering with your own...

00:58:56.560 --> 00:58:56.800
<v Dave Jones>Yeah.

00:58:57.500 --> 00:59:01.560
<v Mark Morin>I don't know if it actually interferes or if there's just enough room in there for it to refract.

00:59:01.960 --> 00:59:03.640
<v Mark Morin>Because of, like, angles and stuff like that?

00:59:03.660 --> 00:59:03.840
<v Mark Morin>Yeah.

00:59:03.840 --> 00:59:06.100
<v Chris Gammell>The idea, like, how it bounces to the...

00:59:06.100 --> 00:59:14.920
<v Mark Morin>You know, we're getting into the territory of fiber where I'm more in generalities than knowing the actual specifics of how you're...

00:59:14.920 --> 00:59:17.160
<v Mark Morin>I mean, we're masters of hand-waving here, so...

00:59:18.580 --> 00:59:19.700
<v Dave Jones>I have some experience.

00:59:19.820 --> 00:59:21.220
<v Dave Jones>Yeah, but multi-mode...

00:59:21.220 --> 00:59:25.600
<v Dave Jones>So everyone might be asking, well, why don't you just use single-mode all the time?

00:59:25.640 --> 00:59:28.480
<v Dave Jones>It's because I think the interface is more critical.

00:59:29.040 --> 00:59:29.140
<v Dave Jones>Right.

00:59:29.140 --> 00:59:34.440
<v Dave Jones>If you're trying to, you know, like, you use that fiber on the back of your PC to connect your audio.

00:59:34.720 --> 00:59:34.920
<v Dave Jones>Right.

00:59:34.920 --> 00:59:37.120
<v Dave Jones>You know, whatever the TOS link, whatever it's called.

00:59:37.480 --> 00:59:37.940
<v Dave Jones>Whatever it is.

00:59:37.940 --> 00:59:39.400
<v Dave Jones>Yeah, yeah, yeah, the SP-DIF thing, right?

00:59:39.520 --> 00:59:41.420
<v Dave Jones>That's going to be multi-mode, I believe.

00:59:41.600 --> 00:59:41.900
<v Dave Jones>Yes.

00:59:41.980 --> 00:59:44.940
<v Dave Jones>Because it's just much easier to align.

00:59:45.060 --> 00:59:45.980
<v Dave Jones>It's much less critical.

00:59:46.140 --> 00:59:46.340
<v Dave Jones>Right.

00:59:46.520 --> 00:59:51.960
<v Mark Morin>And you're just trying to launch, A, like it's audio, so the bandwidth is nothing.

00:59:52.780 --> 00:59:56.000
<v Dave Jones>And the distance is meters, tens of meters.

00:59:56.140 --> 00:59:57.720
<v Dave Jones>It's not, you know, 100 kilometers.

00:59:57.720 --> 01:00:03.420
<v Mark Morin>Right, so you're optimizing for the launch angle of a crappy red LED, right?

01:00:03.820 --> 01:00:04.180
<v Mark Morin>Right.

01:00:04.560 --> 01:00:15.260
<v Mark Morin>And the core diameter is a lot more critical in, like, an optical cable than anything else to get as much light as you can.

01:00:15.840 --> 01:00:16.220
<v Dave Jones>That's right.

01:00:16.220 --> 01:00:23.460
<v Dave Jones>Yeah, that's why we use multi-mode fiber in our seismic cables for data transmission.

01:00:23.640 --> 01:00:25.140
<v Dave Jones>You know, they'd be 150 meters long.

01:00:25.240 --> 01:00:36.120
<v Dave Jones>But you've got to join these things, these big cables together in the middle, on the back deck of a boat, tossing around in the middle of the North Sea with all sorts of gunk and crap and everything in there.

01:00:36.120 --> 01:00:41.740
<v Dave Jones>It's like, eh, you can't exactly get the ideal mating that you want every time, you know?

01:00:41.940 --> 01:00:42.200
<v Dave Jones>Yeah.

01:00:42.200 --> 01:00:49.200
<v Dave Jones>Yeah, we need, like, the most, the least critical optical connection we could get.

01:00:49.400 --> 01:00:50.700
<v Dave Jones>So, multi-mode it was.

01:00:50.900 --> 01:00:51.140
<v Dave Jones>Right.

01:00:51.380 --> 01:00:57.920
<v Dave Jones>And we didn't care about loss down, like, a single 150 meter length where it would be repeated, so.

01:00:58.280 --> 01:00:58.840
<v Mark Morin>Exactly.

01:00:58.840 --> 01:00:58.960
<v Mark Morin>Exactly.

01:00:59.540 --> 01:01:03.140
<v Chris Gammell>So, what about, what about, I mean, so, like, kind of what Dave's talking about here, what about connectors?

01:01:03.260 --> 01:01:13.880
<v Chris Gammell>I mean, so, when, if we, again, if we're looking at one of the boards that you work on, are there specialized connectors or is it literally, like, shoving a piece of fiber into a plastic housing and that does it?

01:01:13.880 --> 01:01:16.960
<v Mark Morin>There's, for the most part, no optical connectors on the board.

01:01:16.960 --> 01:01:22.840
<v Mark Morin>We'd use electrical connectors to go to whatever transducer component.

01:01:22.840 --> 01:01:29.680
<v Mark Morin>And, like, the front panel of our laser, you know, is a DB25 and a DB9.

01:01:30.840 --> 01:01:43.440
<v Mark Morin>So, it's not, we don't really have, I guess, in, like, telecom, if you were launching the signal down the fiber, you'd probably have either a connector or you'd solder the seed diode right onto the board.

01:01:44.100 --> 01:01:44.300
<v Chris Gammell>Gotcha.

01:01:44.460 --> 01:01:47.840
<v Chris Gammell>So, really, you're making boards that then are driving transducers.

01:01:48.380 --> 01:01:48.860
<v Chris Gammell>Is that right?

01:01:48.860 --> 01:01:56.320
<v Mark Morin>Yeah, or we're reading back the photodiode light from a, you know, we're reading back some signal tap from a photodiode.

01:01:56.600 --> 01:01:56.880
<v Chris Gammell>Gotcha.

01:01:57.240 --> 01:01:59.220
<v Chris Gammell>And that also has its own interface and stuff like that.

01:01:59.240 --> 01:01:59.480
<v Chris Gammell>Right.

01:01:59.740 --> 01:01:59.960
<v Chris Gammell>Yeah.

01:02:00.340 --> 01:02:06.220
<v Mark Morin>And then from that, we make all these decisions on what the laser needs to do at a given moment.

01:02:06.660 --> 01:02:06.820
<v Mark Morin>Hmm.

01:02:07.740 --> 01:02:11.760
<v Chris Gammell>Are there interface problems there at all or no?

01:02:11.800 --> 01:02:13.640
<v Chris Gammell>Or is it pretty straightforward at that point?

01:02:13.640 --> 01:02:15.940
<v Chris Gammell>Because I imagine these are high-frequency signals as well, right?

01:02:17.720 --> 01:02:18.080
<v Mark Morin>Somewhat.

01:02:18.080 --> 01:02:20.040
<v Mark Morin>It's surprisingly low.

01:02:21.540 --> 01:02:27.240
<v Mark Morin>You know, everybody looks in an oscilloscope and says, oh, well, when we look at the pulse here, we want to do this.

01:02:27.280 --> 01:02:32.040
<v Mark Morin>And you're like, well, that's nice if you have an oscilloscope front end on the board to read it with.

01:02:32.120 --> 01:02:35.040
<v Mark Morin>But that would, you know, be a $100 chip at least, right?

01:02:35.440 --> 01:02:40.180
<v Mark Morin>So, you know, we are manufacturing things and the cost is part of this.

01:02:40.180 --> 01:02:47.940
<v Mark Morin>So, you can't go – your bandwidth of your input circuit is kind of limited by dollars anyway.

01:02:47.940 --> 01:02:52.600
<v Mark Morin>So, you don't really have to do all this ultra-high bandwidth.

01:02:53.880 --> 01:02:54.240
<v Mark Morin>Yeah.

01:02:54.740 --> 01:02:56.160
<v Mark Morin>You know, cabling or anything.

01:02:56.160 --> 01:03:04.600
<v Mark Morin>But if we had to do something like that, I'd probably just solder right onto the board with the optical component, I'd think.

01:03:04.900 --> 01:03:07.560
<v Chris Gammell>But, no, I mean, that's nice that you don't have to even think about that.

01:03:08.000 --> 01:03:09.720
<v Chris Gammell>So, I mean – or not think about that.

01:03:09.720 --> 01:03:15.800
<v Chris Gammell>But it's less of a manufacturing problem for the board then and more of a system-level integration type thing.

01:03:15.900 --> 01:03:16.200
<v Mark Morin>Oh, yeah.

01:03:16.640 --> 01:03:18.840
<v Mark Morin>There are fiber connectors.

01:03:19.780 --> 01:03:23.080
<v Mark Morin>I mean, if you've ever seen these telecom amplifiers, they're covered in them.

01:03:23.240 --> 01:03:23.480
<v Mark Morin>It's crazy.

01:03:23.680 --> 01:03:24.580
<v Mark Morin>Yeah, I haven't.

01:03:25.020 --> 01:03:25.540
<v Mark Morin>Oh, okay.

01:03:25.860 --> 01:03:27.680
<v Mark Morin>Well, you know.

01:03:27.840 --> 01:03:29.720
<v Chris Gammell>I'll try and add a link to something.

01:03:30.560 --> 01:03:30.760
<v Chris Gammell>I don't know.

01:03:30.800 --> 01:03:33.280
<v Chris Gammell>Maybe you could send me a link to a generic one after we –

01:03:33.280 --> 01:03:33.640
<v Chris Gammell>Oh, sure.

01:03:33.640 --> 01:03:33.940
<v Chris Gammell>Yeah, fair.

01:03:34.080 --> 01:03:42.240
<v Dave Jones>And, like, ours, for example, on our seismic cables, we effectively manufactured our own custom optical connector.

01:03:42.740 --> 01:03:55.580
<v Dave Jones>You know, we would – yeah, we would have, like, a brass ferrule that the two fiber cores, which we would, you know, terminate, we'd use a termination machine, and then you'd polish them down.

01:03:55.580 --> 01:04:09.820
<v Dave Jones>You know, so you'd – so the fiber itself, the actual glass fiber would go through, like, a ceramic, you know, ferrule, and then you'd actually glue that in there, and then you'd polish.

01:04:10.040 --> 01:04:11.760
<v Dave Jones>So the fiber's, like, sticking out of this.

01:04:11.840 --> 01:04:15.500
<v Dave Jones>Maybe I can get some photos, but the fiber is sticking out of this.

01:04:15.540 --> 01:04:16.900
<v Dave Jones>Then you'd actually polish it down.

01:04:17.180 --> 01:04:23.340
<v Dave Jones>So you'd put it in a little jig, and you'd actually polish it on this really fine, you know, sandpaper polishing stuff.

01:04:23.500 --> 01:04:23.720
<v Dave Jones>Sure.

01:04:23.720 --> 01:04:38.420
<v Dave Jones>And then you'd feed that ceramic thing into a brass ferrule, which would be inside our custom connector, which would have not just the optic, it would have the, you know, all the power cables and all the data cables and everything else in there as well.

01:04:38.480 --> 01:04:46.940
<v Dave Jones>So it was combined electrical and optical connector, and you'd join those together, and bam, it just mated the two fibers together.

01:04:47.080 --> 01:04:51.820
<v Dave Jones>And there'd be a little spring mechanism, too, that would push the two ferrules together.

01:04:51.820 --> 01:04:52.100
<v Dave Jones>Yeah.

01:04:52.260 --> 01:04:52.460
<v Dave Jones>Yeah.

01:04:52.580 --> 01:04:53.220
<v Dave Jones>That's cool.

01:04:53.220 --> 01:05:00.040
<v Dave Jones>Because, you know, because we had to have the spring thing, because otherwise your tolerances would be too tight.

01:05:00.240 --> 01:05:02.300
<v Dave Jones>You know, you wouldn't be able to match it up every time.

01:05:02.600 --> 01:05:13.180
<v Dave Jones>And, you know, when this thing's waving around in the ocean, you know, lots of stress and strain on it, you want the fiber to take that out and the two fibers to sort of gently push together all the time.

01:05:13.360 --> 01:05:14.120
<v Dave Jones>So, yeah.

01:05:14.260 --> 01:05:17.300
<v Dave Jones>So a lot of those things are totally custom like that.

01:05:17.300 --> 01:05:24.120
<v Mark Morin>There's definitely, that sounds like what they call like an FC connector, if it was just fiber.

01:05:24.120 --> 01:05:26.620
<v Dave Jones>It was an FC, yes.

01:05:26.840 --> 01:05:27.080
<v Dave Jones>Yeah.

01:05:27.180 --> 01:05:27.420
<v Dave Jones>Okay.

01:05:27.720 --> 01:05:27.960
<v Dave Jones>Yeah.

01:05:28.100 --> 01:05:28.980
<v Dave Jones>There was FC.

01:05:29.140 --> 01:05:30.500
<v Dave Jones>There's FC and SC.

01:05:31.060 --> 01:05:31.320
<v Dave Jones>Yes.

01:05:31.720 --> 01:05:32.720
<v Mark Morin>That's a square one.

01:05:32.940 --> 01:05:33.140
<v Mark Morin>Yep.

01:05:33.480 --> 01:05:33.660
<v Mark Morin>Yep.

01:05:33.660 --> 01:05:40.280
<v Mark Morin>And then my favorite's the S2000, which has got like a little doghouse that automatically opens when you connect them.

01:05:40.340 --> 01:05:40.940
<v Dave Jones>Oh, yes.

01:05:41.020 --> 01:05:41.220
<v Dave Jones>Yeah.

01:05:41.220 --> 01:05:41.760
<v Dave Jones>It's fantastic.

01:05:41.940 --> 01:05:42.040
<v Dave Jones>Yeah.

01:05:42.100 --> 01:05:42.540
<v Dave Jones>It pops up.

01:05:42.660 --> 01:05:45.120
<v Dave Jones>So it keeps dust and crap and crud out.

01:05:45.460 --> 01:05:48.620
<v Mark Morin>Beautiful, but they're like $400 a piece and nobody ever wants to use it.

01:05:48.620 --> 01:05:48.820
<v Mark Morin>Right.

01:05:49.040 --> 01:05:49.160
<v Mark Morin>Yeah.

01:05:49.320 --> 01:05:49.540
<v Mark Morin>Yeah.

01:05:49.540 --> 01:05:49.760
<v Mark Morin>Yeah.

01:05:49.760 --> 01:05:49.840
<v Mark Morin>Yeah.

01:05:49.840 --> 01:05:53.980
<v Mark Morin>So you look at it and you're like, now somebody put some thought into this thing, you know?

01:05:57.320 --> 01:05:59.700
<v Chris Gammell>So you have a theory that you –

01:05:59.700 --> 01:06:00.060
<v Chris Gammell>Oh, yeah.

01:06:00.320 --> 01:06:05.220
<v Chris Gammell>One last thing that we want to talk about this and then one other thing, but what is the theory that you have?

01:06:05.320 --> 01:06:05.660
<v Chris Gammell>Right.

01:06:05.860 --> 01:06:06.760
<v Chris Gammell>You've sent us this before.

01:06:06.980 --> 01:06:16.340
<v Mark Morin>We've been talking about this Q1 theory where the most commonly failed component on everybody's board has to be Q1.

01:06:16.340 --> 01:06:18.840
<v Chris Gammell>So that's how you actually will just go straight to that or what?

01:06:19.260 --> 01:06:19.640
<v Mark Morin>Yes.

01:06:19.840 --> 01:06:21.560
<v Mark Morin>And then I'll justify it.

01:06:21.560 --> 01:06:21.760
<v Mark Morin>Right.

01:06:22.320 --> 01:06:29.480
<v Mark Morin>So the – you would say like why isn't it R1 or actually why isn't it Q9?

01:06:29.720 --> 01:06:29.900
<v Mark Morin>Right.

01:06:30.440 --> 01:06:33.640
<v Mark Morin>Because every board has – the annotation starts at 1.

01:06:33.940 --> 01:06:34.180
<v Mark Morin>Right.

01:06:34.520 --> 01:06:37.020
<v Mark Morin>So Q1 is on every board that has a Q.

01:06:38.560 --> 01:06:39.000
<v Mark Morin>Right.

01:06:39.260 --> 01:06:40.620
<v Chris Gammell>And it's going to be the transistor that breaks.

01:06:40.680 --> 01:06:42.080
<v Chris Gammell>Is that kind of the thought here?

01:06:42.700 --> 01:06:43.860
<v Mark Morin>That's where I'm going.

01:06:43.860 --> 01:06:44.060
<v Mark Morin>Yeah.

01:06:44.240 --> 01:06:48.540
<v Mark Morin>Like the – if you're using a discrete transistor, you're usually handling a little more power.

01:06:48.540 --> 01:06:54.200
<v Mark Morin>You know, if you didn't have that much power, you'd have a – you know, an opto output or something like that.

01:06:55.160 --> 01:06:57.960
<v Dave Jones>Because it would be the most critical part too.

01:06:58.060 --> 01:07:00.540
<v Dave Jones>This comes from the design side of things.

01:07:00.620 --> 01:07:03.000
<v Dave Jones>When you're designing something, you do that critical part first.

01:07:03.000 --> 01:07:05.760
<v Dave Jones>So it's probably going to be given the designated Q1.

01:07:05.880 --> 01:07:11.320
<v Mark Morin>And this is the left to right up to down annotation does that to you, right?

01:07:11.360 --> 01:07:15.140
<v Mark Morin>You draw your most critical circuit first and then you annotate it.

01:07:15.260 --> 01:07:18.880
<v Mark Morin>And that page has all the low annotations on it.

01:07:18.880 --> 01:07:21.520
<v Mark Morin>So, yes, this is my theory.

01:07:21.720 --> 01:07:29.300
<v Mark Morin>And then, you know, it just – it keeps popping up because we're like, well, we're going to start annotation at like 11 or something.

01:07:29.520 --> 01:07:38.020
<v Mark Morin>So we just don't have Q1s anymore or just keep a tally of our annotation and just, you know, okay, we used up to 83 on the last board, started 84.

01:07:38.440 --> 01:07:39.400
<v Mark Morin>Just so we never –

01:07:39.400 --> 01:07:39.520
<v Mark Morin>Right.

01:07:39.600 --> 01:07:40.480
<v Chris Gammell>A running tally.

01:07:40.660 --> 01:07:40.740
<v Chris Gammell>Yeah.

01:07:40.740 --> 01:07:41.140
<v Mark Morin>Right.

01:07:41.260 --> 01:07:43.340
<v Mark Morin>You'll have somebody be like, oh, Q1 failed.

01:07:43.520 --> 01:07:46.280
<v Mark Morin>And you're like, which – like again?

01:07:46.420 --> 01:07:48.460
<v Mark Morin>And then it's a totally different system, you know?

01:07:48.560 --> 01:07:48.740
<v Mark Morin>Yeah.

01:07:48.980 --> 01:07:49.120
<v Mark Morin>Yeah.

01:07:49.400 --> 01:07:49.880
<v Mark Morin>All right.

01:07:49.960 --> 01:07:54.980
<v Mark Morin>So you get this – you get the – like the hairs stand up on the back of your neck every time you hear Q1 after a while.

01:07:55.740 --> 01:07:59.060
<v Chris Gammell>Yeah, especially if you have to go and replace it with a now obsolete component.

01:07:59.200 --> 01:08:00.500
<v Chris Gammell>You're burning another one, right?

01:08:00.700 --> 01:08:00.960
<v Chris Gammell>Right.

01:08:01.020 --> 01:08:02.080
<v Chris Gammell>Yeah, that's true.

01:08:02.340 --> 01:08:04.100
<v Mark Morin>And it's never good.

01:08:04.420 --> 01:08:09.820
<v Mark Morin>But I always thought that was – it's kind of like the – they say most accidents are within two miles of your home.

01:08:09.820 --> 01:08:13.480
<v Mark Morin>It's because to go anywhere, you have to drive the first two miles.

01:08:13.600 --> 01:08:15.680
<v Mark Morin>So every time you get in your car, you're driving those two miles.

01:08:15.800 --> 01:08:17.420
<v Mark Morin>It always seemed like a dumb stat to me.

01:08:18.000 --> 01:08:20.860
<v Mark Morin>And it's the same – like same idea with the Q1 failure.

01:08:21.020 --> 01:08:23.020
<v Mark Morin>It's like it's always going to be Q1.

01:08:23.080 --> 01:08:24.100
<v Mark Morin>It's statistics, yeah.

01:08:24.620 --> 01:08:24.840
<v Mark Morin>Yeah.

01:08:25.020 --> 01:08:25.660
<v Mark Morin>You'd figure.

01:08:26.020 --> 01:08:26.140
<v Mark Morin>Yeah.

01:08:26.760 --> 01:08:27.460
<v Mark Morin>Like a resistor.

01:08:27.720 --> 01:08:31.120
<v Mark Morin>There's so many chip resistors on a board that they're automatically going to diffuse themselves.

01:08:31.120 --> 01:08:36.200
<v Mark Morin>But yeah, this is – that's my running theory about the Q1 failure.

01:08:36.400 --> 01:08:36.740
<v Chris Gammell>I like it.

01:08:37.080 --> 01:08:38.160
<v Chris Gammell>So there's one other thing.

01:08:38.160 --> 01:08:40.880
<v Chris Gammell>Actually, the reason that you and I got in contact with each other –

01:08:40.880 --> 01:08:40.920
<v Chris Gammell>Oh, yeah.

01:08:40.920 --> 01:08:43.860
<v Chris Gammell>You were mentioning to me about some of the jobs that you guys are hiring for.

01:08:44.400 --> 01:08:44.580
<v Chris Gammell>Sure.

01:08:44.580 --> 01:08:47.540
<v Chris Gammell>And I was like, well, you've got to tell us about lasers if we're going to talk about the jobs too.

01:08:47.680 --> 01:08:47.980
<v Chris Gammell>Oh, yeah.

01:08:48.700 --> 01:08:50.540
<v Chris Gammell>But you guys are in Connecticut.

01:08:51.420 --> 01:08:52.280
<v Chris Gammell>We are in Connecticut.

01:08:54.000 --> 01:08:55.060
<v Chris Gammell>I say it as a Clevander.

01:08:55.060 --> 01:09:05.080
<v Mark Morin>So for the – yeah, if you want to flee the cleave and come on out here, then we'd be more than happy to interview you.

01:09:05.320 --> 01:09:10.560
<v Mark Morin>But I don't know what your statistics for Connecticut or Western New England listeners are.

01:09:11.120 --> 01:09:14.920
<v Mark Morin>But I figured if there's a few, then it's worth throwing these links out there.

01:09:14.920 --> 01:09:19.780
<v Mark Morin>We have an opening for an electrical hardware engineer.

01:09:19.880 --> 01:09:23.080
<v Mark Morin>So you'd be using like Altium to design circuit boards for lasers.

01:09:23.380 --> 01:09:28.260
<v Mark Morin>If this last conversation has been thrilling to you, by all means, give me a call.

01:09:29.560 --> 01:09:32.220
<v Chris Gammell>Remember how they haze their new people.

01:09:32.340 --> 01:09:32.940
<v Chris Gammell>Don't forget that.

01:09:33.180 --> 01:09:33.500
<v Chris Gammell>Right.

01:09:33.740 --> 01:09:35.940
<v Mark Morin>You will be strapped to a table with a laser point.

01:09:35.940 --> 01:09:36.040
<v Mark Morin>Laser.

01:09:36.200 --> 01:09:36.460
<v Mark Morin>Yeah.

01:09:36.840 --> 01:09:36.920
<v Mark Morin>Yeah.

01:09:37.160 --> 01:09:37.580
<v Mark Morin>Get ready.

01:09:38.140 --> 01:09:38.480
<v Mark Morin>Don't worry.

01:09:38.480 --> 01:09:40.440
<v Mark Morin>You won't absorb it, whatever the frequency is.

01:09:40.800 --> 01:09:40.920
<v Mark Morin>Yeah.

01:09:41.000 --> 01:09:43.080
<v Mark Morin>Well, that's the joke, right?

01:09:43.440 --> 01:09:43.640
<v Mark Morin>Yeah.

01:09:43.820 --> 01:09:44.100
<v Mark Morin>Right.

01:09:44.620 --> 01:09:45.320
<v Mark Morin>You find that out.

01:09:47.180 --> 01:09:48.840
<v Chris Gammell>Where are you guys in Connecticut?

01:09:49.020 --> 01:09:49.580
<v Chris Gammell>I mean like where –

01:09:49.580 --> 01:09:54.900
<v Mark Morin>Oh, so we are two and a half hours north of New York City, I guess.

01:09:55.080 --> 01:09:55.380
<v Mark Morin>Mm-hmm.

01:09:55.420 --> 01:09:55.700
<v Mark Morin>Okay.

01:09:55.720 --> 01:09:57.080
<v Mark Morin>It's the closest big landmark.

01:09:57.260 --> 01:09:58.040
<v Mark Morin>We're north of Hartford.

01:09:58.040 --> 01:10:01.460
<v Mark Morin>If you've ever been to Bradley International Airport, we are –

01:10:01.460 --> 01:10:01.620
<v Mark Morin>Nope.

01:10:02.280 --> 01:10:06.700
<v Mark Morin>We are within – you could throw a snowball and hit Bradley Airport from here.

01:10:06.700 --> 01:10:12.560
<v Mark Morin>So we're on Route 91, which is like our major highway down here.

01:10:12.820 --> 01:10:16.640
<v Mark Morin>And anybody from the area will know exactly where I'm talking about.

01:10:16.780 --> 01:10:18.100
<v Mark Morin>But we're in the town of East Granby.

01:10:18.200 --> 01:10:22.360
<v Mark Morin>If you just want to go on Google Maps and see how far your commute would be if you applied for this job.

01:10:22.600 --> 01:10:24.600
<v Chris Gammell>Or how far it would be from New York and Boston.

01:10:25.220 --> 01:10:25.580
<v Chris Gammell>Right.

01:10:25.720 --> 01:10:25.940
<v Mark Morin>Yes.

01:10:26.220 --> 01:10:26.680
<v Mark Morin>That too.

01:10:27.620 --> 01:10:31.660
<v Mark Morin>There's clusters of engineering out in Boston, obviously.

01:10:32.060 --> 01:10:32.300
<v Chris Gammell>Yeah.

01:10:32.680 --> 01:10:34.880
<v Mark Morin>And out here it's a little more sparse.

01:10:34.880 --> 01:10:38.200
<v Mark Morin>But there's a lot of big defense contractors up on 91 here.

01:10:38.820 --> 01:10:39.360
<v Mark Morin>Oh, interesting.

01:10:40.540 --> 01:10:44.780
<v Mark Morin>There's a Northrop Grumman and what – it used to be Hamilton Sunstrand.

01:10:44.860 --> 01:10:48.060
<v Mark Morin>I think it's Hamilton something else now.

01:10:48.740 --> 01:10:51.820
<v Mark Morin>And I think there's an electric boat down near New Haven.

01:10:52.820 --> 01:10:52.960
<v Chris Gammell>Yeah.

01:10:53.000 --> 01:11:00.480
<v Chris Gammell>I know that former multiple guests of the show, Greg Charvat, lives down south there now.

01:11:00.580 --> 01:11:01.320
<v Chris Gammell>I'm not sure where.

01:11:01.380 --> 01:11:02.560
<v Chris Gammell>I know he lives on the water somewhere now.

01:11:02.620 --> 01:11:02.880
<v Chris Gammell>Sure.

01:11:02.880 --> 01:11:03.520
<v Chris Gammell>But, yeah.

01:11:03.620 --> 01:11:03.800
<v Chris Gammell>Yeah.

01:11:03.920 --> 01:11:04.480
<v Chris Gammell>It's interesting.

01:11:04.700 --> 01:11:04.680
<v Speaker ?>It's funny.

01:11:05.420 --> 01:11:08.700
<v Chris Gammell>It must have been some kind of tech center at some point, right?

01:11:08.740 --> 01:11:11.040
<v Chris Gammell>I mean, because of, like you said, all the defense contracting stuff.

01:11:11.460 --> 01:11:12.660
<v Mark Morin>There's a bunch of it.

01:11:12.700 --> 01:11:15.740
<v Mark Morin>I don't know if it just pops up on every major highway or what.

01:11:15.840 --> 01:11:18.920
<v Mark Morin>Because it's just – it's ever-present, it seems like.

01:11:19.260 --> 01:11:19.520
<v Chris Gammell>Yeah.

01:11:19.640 --> 01:11:19.800
<v Chris Gammell>Well.

01:11:19.800 --> 01:11:21.060
<v Mark Morin>But, yeah.

01:11:21.120 --> 01:11:24.360
<v Mark Morin>And then we have another opening for an embedded software engineer, you know.

01:11:24.700 --> 01:11:25.420
<v Mark Morin>Wrong show.

01:11:25.860 --> 01:11:26.280
<v Mark Morin>Wrong show.

01:11:26.460 --> 01:11:26.520
<v Mark Morin>Yeah.

01:11:26.780 --> 01:11:27.420
<v Mark Morin>Sorry, guys.

01:11:27.520 --> 01:11:27.640
<v Mark Morin>Sorry.

01:11:28.960 --> 01:11:34.620
<v Mark Morin>If anybody wants to make a career change and stop committing all your sins to copper and

01:11:34.620 --> 01:11:40.940
<v Mark Morin>then just be able to change your switch statement to fix a problem, then, you know, you could

01:11:40.940 --> 01:11:43.160
<v Mark Morin>hop on over to embedded software.

01:11:43.600 --> 01:11:46.740
<v Chris Gammell>Ain't no obsolete components in embedded software.

01:11:46.900 --> 01:11:46.920
<v Chris Gammell>No.

01:11:46.920 --> 01:11:47.000
<v Chris Gammell>No.

01:11:47.400 --> 01:11:47.840
<v Mark Morin>Yeah.

01:11:48.640 --> 01:11:49.440
<v Chris Gammell>Well, that sounds cool, man.

01:11:49.640 --> 01:11:51.620
<v Chris Gammell>That's a lot of interesting stuff.

01:11:51.760 --> 01:11:58.340
<v Chris Gammell>I mean, like I said, I have very little knowledge of the whole optical side of things, but it's big.

01:11:58.460 --> 01:12:00.260
<v Chris Gammell>I mean, like there is a lot of need for this stuff.

01:12:00.260 --> 01:12:00.700
<v Chris Gammell>Oh, there is.

01:12:01.440 --> 01:12:01.680
<v Dave Jones>Yep.

01:12:01.980 --> 01:12:05.360
<v Dave Jones>And there's a huge amount of science and physics behind it that, you know.

01:12:05.600 --> 01:12:05.780
<v Dave Jones>Yeah.

01:12:05.780 --> 01:12:08.840
<v Mark Morin>It's certainly interesting stuff to work on, that's for sure.

01:12:09.180 --> 01:12:09.380
<v Mark Morin>Yeah.

01:12:09.820 --> 01:12:11.720
<v Mark Morin>Well, thank you very much, Mark, for joining us.

01:12:11.740 --> 01:12:12.700
<v Mark Morin>Thank you guys for having me.

01:12:12.720 --> 01:12:13.260
<v Mark Morin>This was great.

01:12:13.260 --> 01:12:16.160
<v Chris Gammell>We encourage people to check out the lasers and check out the company.

01:12:16.320 --> 01:12:16.920
<v Chris Gammell>That sounds cool.

01:12:17.060 --> 01:12:17.360
<v Chris Gammell>Thanks, Mark.

01:12:17.360 --> 01:12:17.820
<v Chris Gammell>Thank you.

01:12:17.920 --> 01:12:18.100
<v Chris Gammell>Cool.

01:12:18.220 --> 01:12:18.580
<v Chris Gammell>Thanks, mate.

01:12:18.640 --> 01:12:19.060
<v Chris Gammell>Have a good one.

01:12:19.120 --> 01:12:19.720
<v Chris Gammell>Catch you next time.

01:12:19.720 --> 01:12:19.720
<v Speaker ?>

01:12:19.720 --> 01:12:19.720
<v Speaker ?>

01:12:19.720 --> 01:12:19.720
<v Speaker ?>

01:12:19.720 --> 01:12:19.720
<v Speaker ?>

01:12:19.720 --> 01:12:19.720
<v Speaker ?>

01:12:19.720 --> 01:12:19.720
<v Speaker ?>

01:12:19.720 --> 01:12:19.720
<v Speaker ?>

01:12:19.720 --> 01:12:19.720
<v Speaker ?>

01:12:19.720 --> 01:12:19.720
<v Speaker ?>

01:12:19.720 --> 01:12:19.720
<v Speaker ?>

01:12:19.720 --> 01:12:19.720
<v Speaker ?>

01:12:19.720 --> 01:12:19.720
<v Speaker ?>

01:12:19.720 --> 01:12:19.720
<v Speaker ?>

01:12:19.720 --> 01:12:19.720
<v Speaker ?>

01:12:19.720 --> 01:12:19.720
<v Speaker ?>

01:12:19.720 --> 01:12:19.720
<v Speaker ?>
